Bộ ghi dữ liệu momen xoắn Tohnichi ST3, ST3-BT series

Bộ ghi dữ liệu momen xoắn Tohnichi ST3, ST3-BT series

Bộ ghi dữ liệu momen xoắn Tohnichi ST3, ST3-BT series

Bộ ghi dữ liệu momen xoắn Tohnichi ST3, ST3-BT series

Bộ ghi dữ liệu momen xoắn Tohnichi ST3, ST3-BT series
Bộ ghi dữ liệu momen xoắn Tohnichi ST3, ST3-BT series

Sản Phẩm

  • Bộ ghi dữ liệu momen xoắn Tohnichi ST3, ST3-BT series

  • Giá : Liên hệ
  • MASP : ST10N3-G, ST50N3-1/2-G, ST50N3-3/8-G, ST100N3-G, ST200N3-G, ST500N3-G, ST1000N3-G
  • Nhà sản xuất : TOHNICHI
  • Spintork®, ST3-G Digital Torque Checker is the world's most compact rechargeable rotary type torque measuring equipment.

Chi tiết Sản phẩm Chi tiết Sản phẩm

 

Tohnichi Torque Tester/Checker
model :ST3-G(-BT) Spintork® Torque Checker

 

- Spintork®, ST3-G Digital Torque Checker is the world's most compact rechargeable rotary type torque measuring equipment. (Patented) 
- Ideal for routine torque maintenance checks on nutrunners.
- Allows operators to perform torque checks (routine inspections) of multi-spindle tightening equipment while continuing tightening at the same time. Connecting the optional extension bar, which has the same length as the ST3, to spindles not installed with Spintork® makes it easy to check torque without removing the nutrunner from multi-spindle tightening equipment. This reduces steps in the quality inspection process.
- Using the Bluetooth® equipped version model ST3-G-BT,its is possible to inspect nutrunners inline and collect torque checks wirelessly.
- ST3-G is equipped with an angle sensor. If tightening is done with a handheld nutrunner attached to the ST3-G, torque checking and angle checking can be done at the same time as tightening operations. (*Note: Angle measurements are measurements from set snug torque values.)
- When the supplied USB connecting cable is connected to a PC, tightening torque and angle data determined through measurements using a ST3-G SpinTork Rotary Peak Torque Meter can be analyzed and controlled in Excel format using ExRcv for ST3. (ExRcv for ST3 is complimenary with purchase and available for downloading upon request..)
- The ST3-G-BT can be used to create torque and angle graphs. With a Bluetooth®-equipped ST3-BT, torque and angle can be measured and recorded continuously, and tightened-to-completion data is transmitted wirelessly to a PC. Then after ExRcv for ST3 collects the data on an Excel file, graphs displaying tightening torque and angle values can be created. (*Note: When the ST3 is not the -BT version, memory stores only angle data at time of recording and maximum torque, and graphs cannot be created.)
- A Tightening Data Management System can be created for Bluetooth-equipped ST3-BT / ST3-G-BT series devices, through use of the special custom-modified TDMS Software.

 

 

 

 

Picture: tohnichi torque checker ST200N3-G ( 40-200N.m) at Semiki's warehouses

 

Specifications :

 

 

 

 

Copyright ©  SEMIKI CORP. All rights reserved.

 

Semiki Instrumentation Corp is authorized to promote, sell, store and distribute with the direct support and technical assistance of

Torque TOHNICHI : www.tohnichi.com.vn


Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Tel: +84 28 2253 3522

 

~DOING OUR BEST FOR YOU~

Các sản phẩm khác

máy đo độ dày lớp phủ fischer PHASCOPE PMP10 DUPLEX

Chi tiết

máy dò lỗ kim lớp phủ SANKO HOLYSTAR 15N

Chi tiết

THIẾT BỊ ĐO LỰC SIẾT HIỂN THỊ TỰ ĐỘNG KANON DLT-N-UC

Chi tiết

Thước Thủy chính xác-cast iron level F.S.K

Chi tiết

máy kiểm tra độ dẫn điện FISCHER SIGMASCOPE SMP350

Chi tiết

THIẾT BỊ ĐO ĐỘ CỨNG XỐP MỀM TECLOCK GS-744G, GS743G

Chi tiết

Yêu cầu báo giá

Fanpage