ĐỒNG HỒ ĐO NHIỆT ĐỘ BỀ MẶT PTC 313C, 314C

ĐỒNG HỒ ĐO NHIỆT ĐỘ BỀ MẶT PTC 313C, 314C

ĐỒNG HỒ ĐO NHIỆT ĐỘ BỀ MẶT PTC 313C, 314C

ĐỒNG HỒ ĐO NHIỆT ĐỘ BỀ MẶT PTC 313C, 314C

ĐỒNG HỒ ĐO NHIỆT ĐỘ BỀ MẶT PTC 313C, 314C
ĐỒNG HỒ ĐO NHIỆT ĐỘ BỀ MẶT PTC 313C, 314C

Sản Phẩm

  • ĐỒNG HỒ ĐO NHIỆT ĐỘ BỀ MẶT PTC 313C, 314C

  • Giá : Liên hệ
  • MASP : 312C, 313C, 314C, 315C, 330C
  • PTC U.S.A.Magnetic Surface Thermometers PTC® surface thermometers are thermodynamically designed to measure surface temperatures. It has been calibrated for use in an ambient temperature of approximately 70°F (21°C). Higher surrounding air temperatures will cause very slightly higher readings and lower surrounding air temperatures will cause very slightly lower readings. For accurate measurements the thermometer should be used in still air. The surface to be measured should be flat and smooth as more intimate contact will provide more accurate readings. The greater the thermal mass of the source, the more accurate the readings. Place the instrument on any horizontal surface and allow approximately 3 minutes for it to reach stability. The instrument features two built-in magnets which act as the base and hold the thermometer firmly to any non-horizontal ferrous surface.

Chi tiết Sản phẩm Chi tiết Sản phẩm

 

 

PTC instruments U.S.A 


Magnetic Surface Thermometers


PTC® surface thermometers are thermodynamically designed to measure surface temperatures. It has been calibrated for use in an ambient temperature of approximately 70°F (21°C).

Higher surrounding air temperatures will cause very slightly higher readings and lower surrounding air temperatures will cause very slightly lower readings.

For accurate measurements the thermometer should be used in still air.

The surface to be measured should be flat and smooth as more intimate contact will provide more accurate readings. The greater the thermal mass of the source, the more accurate the readings.


Place the instrument on any horizontal surface and allow approximately 3 minutes for it to reach stability.

The instrument features two built-in magnets which act as the base and hold the thermometer firmly to any non-horizontal ferrous surface.

 

 

 

Features 


• PTC® Quality -- Made in the U.S.A.

• Accuracy of ±2% of Full Scale Range

• Aluminum Dial

• NIST Certification Available

• Every Unit Individually Calibrated

 

Designed for hospitals and industrial applications such as:

pipe surfaces, weld preheats, boilers, cylindrical tanks, motors, generators, engines, bearings, hot plates, griddles, die-cast dies, foundry core boxes and annealing ovens.

 

 

 

Pic: PTC Magnetic Surface Thermometer -20° to 250°C Model 313C at Semiki's warehouse

 

Maintenance and calibration : 

 

 We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

 

 

 

 

DISTRIBUTED BY:

 

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

 

 

~DOING OUR BEST FOR YOU~

 

Các sản phẩm khác

BỘ GHI, PHÂN TÍCH DỮ LIỆU RUNG 2 KÊNH SHOWA 9801

Chi tiết

BỘ GHI NHIỆT ĐỘ, ĐỘ ẨM SATO SK-L754 (8870-00)

Chi tiết

Bộ ghi,phân tích dữ liệu nhiệt độ 8 kênh PROVA 800

Chi tiết

NHIỆT KẾ ĐIỆN TỬ TYPE K SATO SK-1110,SK-1120

Chi tiết

Máy đo nhiệt độ trạm hàn Hakko FG-101B (FG-101B-81)

Chi tiết

nhiệt ẩm kế để bàn, treo tường AND AD-5680

Chi tiết

Yêu cầu báo giá

Fanpage