MÁY ĐO HIỆU SUẤT ION HOÁ (ionizer) SIMCO EA-5J

MÁY ĐO HIỆU SUẤT ION HOÁ (ionizer) SIMCO EA-5J

MÁY ĐO HIỆU SUẤT ION HOÁ (ionizer) SIMCO EA-5J

MÁY ĐO HIỆU SUẤT ION HOÁ (ionizer) SIMCO EA-5J

MÁY ĐO HIỆU SUẤT ION HOÁ (ionizer) SIMCO EA-5J
MÁY ĐO HIỆU SUẤT ION HOÁ (ionizer) SIMCO EA-5J

Sản Phẩm

  • MÁY ĐO HIỆU SUẤT ION HOÁ (ionizer) SIMCO EA-5J

  • Giá : Liên hệ
  • MASP : EA-5J, CPM-LPS
  • Nhà sản xuất : SIMCO ION

Chi tiết Sản phẩm Chi tiết Sản phẩm

 

 

SIMCO ION

 

Hand held Charge plate Monitor


Model : EA-5J

 

Features an auto mode that measures attenuation time and ion balance at the push of a button.
Improves efficiency when evaluating and maintaining ionizers.

 

Simco-Ion Model EA-5J Charge Plate Monitor (CPM) is a compact instrument used for measuring the ionizer's performance. It is small, portable, handy and easy to use.


It was designed to provide quantitative, accurate measurements for a variety of air ionization tests. It can be easily used for Discharge time (Decay time) and Ion Balance measurements for the ionizers. It is the most suitable for the routine inspection as a support for the maintenance of ionizers, the selection and the evaluation of the ionizers and soon.


It has a micro-computer inside and it is a multi-function instrument. Seven color button switches placed on the surface make measurements easy.


There are two measurement modes such as Manual mode and automatic mode (Auto mode).


Manual mode is used for individual measurement (Discharge time / Ion Balance). The measurement conditions can be changed by a SET button placed below LCD.


In Auto mode, both measurements of discharge time and ion balance can be done automatically by pressing a Plate Control button once. The measurement conditions are according as the set in the manual mode. After the measurements, each measuring data can be memorized up to 1,000 by pressing a SAVE button. The saved data can be down-loaded to a personal computer as CSV or TXT form using a USB cable. It will be help for reduction of the input work to a personal computer of the measurement data.


A large digital LCD helps to confirm the measured value. The plastic enclosure must be grounded using a grounding lead provided for accurate measuring.

 

Special features : 

 

・Compact, light weight and easy to use operation
・Decay time and Ion balance can be measured with one touch operation.
・1000 measurement values can be stored.
・Measurement parameters can be selected depends on the type of ionizer.
・Analog output is equipped.
・Standard plate is complied with ANSI/ESD-STM3.1-2000. Small plate helps to measure for the hard to reach place.

 

 

 

 

Application:

・For the evaluation and maintenance of ionizers.
・For the evaluation of ESD static control products.
・For the ESD static control educational purpose.

 

Video:  Multi Function ESD meter Simco EA-5J with CPM-LPS charge plate | intro ( Vietnamese )

 

Specification : 

 

 

 

 

Picture: simco EA-5J monitor  at Semiki's warehouse

 

 

 

Picture: simco CPM-LPS charge plate ( 150mm x 150mm)  at Semiki's warehouse

 

 

 

 

Picture:  Multi Function ESD meter Simco EA-5J with CPM-LPS charge plate at Semiki's warehouse

 

 

 

Manual Measurement mode :

 

①Ion Balance measurement mode


Plate Voltage shows the average voltage (Average by which the maximum value and
minimum value are excluded from the measured data of every 20 ms)
0.2s:Average data of 8 points sampling data
1s:Average data of 48 points of sampling data
5s:Average data of 248 points of sampling data
10s:Average data of 498 points of sampling data
The setting of measuring time (10sec, 30sec, 60sec)
Peak and valley value of within a setting measuring time will be dispalayed.


②Decay time measurement mode


Plate Voltage shows the average voltage (Average by which the maximum value and
minimum value are excluded from the measured data of every 20 ms)
The display of Decay time (Fast mode:0.1sec~99.9sec, Slow mode 100sec~300sec.
The setting of measuring time(10sec,30sec,60sec,120sec,300sec)
Each Positive and negative polarity can be measured.
Finish voltage can be changed (5V~100V every 5V steps)

 

Automatic measurement mode


・Ion Balance measurement :
According to set measuring time, it automatically measures average value, Peak and
valley values.
・Decay Time measurement :
It measures positive and negative decay time according to the set measuring time.
・Store the data :
Store the data after fnishing the measurement by pressing save button. (1000 values
max) Stored data (CSV) can be downloaded through USB (mini B) connector on side

 

Display


①LCD Display
・Voltage and Time
・Error message, Battery status
・Bar type indicator for Ion Balance
・Operating mode (Au,Ma,Pc,ib[Ion Balance]±dE[Decay],ERROR


②LED Status indicatror
・HV:out Apply the high voltage to the plate
・GND:Plate is grounded
・Each operating buttons lights up for mode indication.
・CHARGE:Charging the battery

 

Maintenance and calibration : 

 

 We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

 

 

 

 

DISTRIBUTED BY:

 

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

 

 

~DOING OUR BEST FOR YOU~

 

 

 

 

Các sản phẩm khác

THIẾT BỊ PHÂN TÍCH ĐIỆN ÁP CƠ THỂ DESCO 19431

Chi tiết

máy đo PH METTLER TOLEDO Seven2Go S2

Chi tiết

máy đo độ nhớt nước sốt Bostwick Consistometer

Chi tiết

máy đo độ nhớt kem hàn MALCOM PM-2A, PM-2B, PM-2C

Chi tiết

Máy đo độ nhớt Brookfield DVPlus Viscometer

Chi tiết

Phòng sạch tiêu chuẩn

Chi tiết

Yêu cầu báo giá

Fanpage