精密機械 株式会社 +84 28 2253 3522 sales@semiki.com

máy đo lực siết vít Cedar CD-100M, CD-10M

máy đo lực siết vít Cedar CD-100M, CD-10M

máy đo lực siết vít Cedar CD-100M, CD-10M

máy đo lực siết vít Cedar CD-100M, CD-10M

máy đo lực siết vít Cedar CD-100M, CD-10M
máy đo lực siết vít Cedar CD-100M, CD-10M

Sản Phẩm

  • máy đo lực siết vít Cedar CD-100M, CD-10M

  • Giá : Liên hệ
  • MASP : CD-10M, CD-100M
  • Nhà sản xuất : CEDAR JAPAN
  • Management of electric screw driver , Everyday check of an electric driver can be performed. Since various information is displayed on a display board, it is very intelligible. The change of a measurement unit can be performed. Memory data is 800 affairs. Real-time output Every about 1 / 180 seconds The taking-in software of data can download from a homepage.

Chi tiết Sản phẩm Chi tiết Sản phẩm

 

 

 

Cedar Torque tester

 

Model : CD-100M, CD-10M

 

The best for everyday check of an electric driver

Everyday check of an electric driver can be performed.
Since various information is displayed on a display board, it is very intelligible.
The change of a measurement unit can be performed.
Memory data is 800 affairs.
Real-time output Every about 1 / 180 seconds

 

 

 

Picture: Cedar CD-100M at Semiki's warehouse

 

Feature : 

- Show "Measurement mode", "Measurement unit","maximum, minimum, average"
- Switchable measurement unit
- Enable to save 5 sets of settings such as upper limit and lower limit
- 800 items of memory data
- Real-time output About every 1/180 seconds
- Data acquisition software can be downloaded for free 

 

Specification CD-100M CD-10M
Measuring range  
(at the time of Track)
0.10~10 N・m 0.010~1 N・m 
1.0~100 kgf・cm 0.10~10 kgf・cm
1.0~90 lbf・in 0.10~9  lbf・in
Accuracy ±0.5%(199 or less digit±1digit)
Display The 3.5 figures digital display of LCD
The measurement direction CW-CCW (right and left)
Measurement   Mode Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)
High and low limits judging function High and low value are measurement within the limits, and can be set up.
Real-time Output Load torque value is outputted every about1/ 180 second.
The Maximum, the minimum, and the average value display The maximum, the minimum value, and average value of the saved data
Automatic Clearance Automatically clear the displayed value after certain time
(0.5 - 3.0 sec,selectable at each 0.5 sec).
Setting 0.0 sec for manual Zero clearance
One-touch zero A clear button is pushed and it is a zero.  Data is outputed.
Data output ASCII format (baud rate 19200)
Power supply Ni-Cd chargeable battery 1.2V×5cells 700mAh
Auto power save 10 minutes no use, automatically switch off.
Charging time About 3 hours
Continunous working time About 12 hours
Socket fit mouth □ 20mm/  □9.5mm
Weight  Abbreviation   1 kg
Outside dimension 160(W)×125(D)×55(H)
Attachment Measurement joint SJ50/SJ10K Measurement joint SJ10

Accessories
(one piece each)

AC/DC adaptor
Carrying case
An inspection report, a proofreading certificate, traceability system figure

 

 

Measurement of an electric driver

 

Specification SJ-10 SJ-50
Measuring range N・m 1(MAX) 5(MAX)
Outer diameter 
size(mm)
Bit engagement 
part (screw part)
HEX 
Opposite neighborhood 5㎜
HEX 
Opposite neighborhood 6㎜
Outside diameter/Height φ17 / 45(un-compressing) φ20 / 42(un-compressing)
Installation 20Square×4(t)
 

 

Maintenance and calibration : 

 

 We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

 

 

 

DISTRIBUTED BY:

 

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

 

 

~DOING OUR BEST FOR YOU~

 

 

 

Các sản phẩm khác

máy đo lực kéo,nén IMADA PS, PSS SERIES

Chi tiết

THIẾT BỊ KIỂM TRA LỰC NÉN IMADA ZTA/ZTS-LM-LC Series

Chi tiết

BỘ NGUỒN HIOS AC SANG DC T-45BL

Chi tiết

Renishaw Stylus and Accessories

Chi tiết

ĐẦU DÒ QUÉT 3D-RENISHAW SP600 SERIES

Chi tiết

thước đo sâu Peacock digal depth gauge T series

Chi tiết

Yêu cầu báo giá

Fanpage

精密機械 株式会社 +84 28 2253 3522 sales@semiki.com