máy kiểm tra độ dẫn điện FISCHER SIGMASCOPE SMP350

máy kiểm tra độ dẫn điện FISCHER SIGMASCOPE SMP350

máy kiểm tra độ dẫn điện FISCHER SIGMASCOPE SMP350

máy kiểm tra độ dẫn điện FISCHER SIGMASCOPE SMP350

máy kiểm tra độ dẫn điện FISCHER SIGMASCOPE SMP350
máy kiểm tra độ dẫn điện FISCHER SIGMASCOPE SMP350

Sản Phẩm

  • máy kiểm tra độ dẫn điện FISCHER SIGMASCOPE SMP350

  • Giá : Liên hệ
  • MASP : SIGMASCOPE SMP350
  • Nhà sản xuất : HELMUT FISCHER
  • The SIGMASCOPE® SMP350 measures the electrical conductivity using the phase-sensitive eddy current method, which is approved by both DIN EN 2004-1 and ASTM E 1004 for determining conductivity. This kind of signal evaluation allows for contact-free determination of a substrate’s electrical conductivity, even under paint or plastic coatings up to 500 μm thick. This method also marginalizes the influence of surface roughness.

Chi tiết Sản phẩm Chi tiết Sản phẩm

 

 

Helmut Fischer compact handheld device for determining the electrical conductivity of non-ferrous metals such as aluminum or copper.

 

model: SIGMASCOPE SMP350

 

SIGMASCOPE SMP350 is a compact handheld device for determining the electrical conductivity of non-ferrous metals such as aluminum or copper.

The measured conductivity further enables you to draw conclusions about the hardness and strength of heat-treated materials.

Evidence of heat damage and material fatigue can thus be established.

For this, the phase-sensitive eddy current method is used, which is approved for the measurement of conductivity according to DIN EN 2004-1 and ASTM E 1004.

 

 

Applications:


- Conductivity testing on raw materials for sorting and quality assurance
- Inspection of alloying in coinage (e.g. the conductivity of Euro coins)
- Assessment of the hardness and strength of heat-treated materials
- Control of the material stability of airframes or similar components that can be altered by temperature swings
- Estimation of the phosphorous content in copper alloys or copper-bearing materials
- Tracking of precipitation processes, e.g. in Cu-Cr alloys
-Inspection of the homogeneity of alloys
- Scrap sorting

 

 

Technical data :


• Measurements pursuant to ASTM E 1004 and DIN EN 2004-1
• SMP350 with probe FS40 fulfills Boeing specification BAC 5651
• Measurement frequencies ranging from 15 kHz to 2 MHz, depending on the probe
• Measurement range: 0.5 – 65 MS/m or 1 – 112% IACS
• Measurement precision at ambient temperature: ±0.5% of reading
• Operating temperature: 0 – 40 °C
• Lift-off compensation to 500 μm
• Smallest diameter measurement area without noticeable influence on the reading: 13 mm
• Connector for electrical conductivity probe, with or without integrated temperature sensor
• Connector for optional temperature sensor TF100A
• USB communication and printer port
• Power supply via battery or mains electricity

 

Accesories: 

 *  Probe FS40 family

 

 

 

Calibration standards

 

 

 

Maintenance and calibration : 

 

 We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

 

 

 

 

DISTRIBUTED BY:

 

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

 

 

~DOING OUR BEST FOR YOU~

 

Các sản phẩm khác

MÁY ĐO TỐC ĐỘ VÒNG QUAY NIDEC SHIMPO EE-1B / EE-2B

Chi tiết

MÁY ĐO ĐỘ CỨNG ROCKWELL HRC Mitutoyo 963 Series

Chi tiết

thước đo đường kính ngoài PEACOCK LA SERIES

Chi tiết

ĐẦU DÒ ĐO TỪ TÍNH KANETEC TM-901PRB, TM-901AXL

Chi tiết

Máy cân chỉnh trục dây belt gates unitta Laser AT-1

Chi tiết

THIẾT BỊ ĐO LỰC XOẮN NẮP NIDEC SHIMPO TNP SERIES

Chi tiết

Yêu cầu báo giá

Fanpage