MÁY KIỂM TRA NHIỆT ĐỘ QUE HÀN HAKKO FG100B-83

MÁY KIỂM TRA NHIỆT ĐỘ QUE HÀN HAKKO FG100B-83

MÁY KIỂM TRA NHIỆT ĐỘ QUE HÀN HAKKO FG100B-83

MÁY KIỂM TRA NHIỆT ĐỘ QUE HÀN HAKKO FG100B-83

MÁY KIỂM TRA NHIỆT ĐỘ QUE HÀN HAKKO FG100B-83
MÁY KIỂM TRA NHIỆT ĐỘ QUE HÀN HAKKO FG100B-83

Sản Phẩm

  • MÁY KIỂM TRA NHIỆT ĐỘ QUE HÀN HAKKO FG100B-83

  • Giá : Liên hệ
  • MASP : FG100B-83, FG100B-81
  • Nhà sản xuất : HAKKO
  • Automatic measurement to standardize the process. Minimize individual differences in how to complete measurement and read result.

Chi tiết Sản phẩm Chi tiết Sản phẩm

 

HAKKO Japan

 

Thermometer / soldering tester

 

MODEL: FG100B-83

 

Key Features:

- Automatic measurement to standardize the process

- Automatic temperature measurement

- Measurement counter can be useful for control of changing sensor.

- Fine sensor can deliver accurate measurements.

 

 

 

* Automatic temperature measurement:AUTO HOLD Function

The measurement will end automatically when tip temperature is stabilized.

The measurement process will be the same no matter who does it.

 

* Constant display of measured max. temperature:MAX HOLD Function

Max measured tip temperature will be displayed.

This function can be useful for quality control of components and P.W.B.

 

Video: HAKKO FG100B-83 Soldering Tester | review ( Vietnamese)

 

SPECIFICATION:

 

 

 

 

Fig: HAKKO FG100B-83 thermometer at Semiki's warehouse

 

The sensor replacement period is about 50 times per single sensor in general, but this changes depending on the temperature used and the components in the solder and flux.

If you use lead-free solder, the sensor needs to be replaced more frequently. 

If the sensor degrades because it is being eaten away by the solder, it will register a low temperature.

Even if the sensor is not broken, replace it after about 50 measurements. 

Even if the soldering tip has degraded, the temperature will register extremely low.

Keep these points in mind and decide on the sensor replacement period.


Caution: The sensor is extremely thin and may break if pushed with force.

 

 

Pic.: HAKKO Sensor AS5000 for Soldering Tester FG100B-83 at Semiki's warehouse

 

* OPTION ACCESSORIES : 

 

 

 

Maintenance and calibration : 

 

 We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

 

 

 

 

DISTRIBUTED BY:

 

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

 

 

~DOING OUR BEST FOR YOU~

 

 

 

Các sản phẩm khác

Sound Level Meter RION NA-28

Chi tiết

cảm biến, đầu đo độ rung showa sokki

Chi tiết

Máy đo nồng độ TDS atago PAL-release agent 4538

Chi tiết

MÁY ĐO ĐỘ ỒN ÂM THANH TESTO 815

Chi tiết

MÁY PHÂN TÍCH ĐỘ RUNG RION VA-12

Chi tiết

BỘ GHI NHIỆT ĐỘ VÀ ĐỘ ẨM T&D TR-72A

Chi tiết

Yêu cầu báo giá

Fanpage