SÚNG CÂN BẰNG ION SHISHIDO Piezonizer AGZⅢ
SÚNG CÂN BẰNG ION SHISHIDO Piezonizer AGZⅢ
SÚNG CÂN BẰNG ION SHISHIDO Piezonizer AGZⅢ
SÚNG CÂN BẰNG ION SHISHIDO Piezonizer AGZⅢ
SÚNG CÂN BẰNG ION SHISHIDO Piezonizer AGZⅢ
SÚNG CÂN BẰNG ION SHISHIDO Piezonizer AGZⅢ
Sản Phẩm
SÚNG CÂN BẰNG ION SHISHIDO Piezonizer AGZⅢ
- Giá : Liên hệ
- MASP : PIEZONIZER AGZ Ⅲ, AGZ Ⅱ-PA,
- Nhà sản xuất : SHISHIDO-ESD
- The PIEZONIZER AGZⅡ-PA is a compact and lightweight air gun type ionizer that eliminates static electricity from charged objects as well as a wave motion nozzle feature to powerfully blow away dust attached by static electricity with pulses of air. Since the high-voltage power supply and the air valve are mounted in the main unit, an external controllers are unnecessary.
Chi tiết Sản phẩm
SHISHIDO Ion blow gun PIEZONIZER AGZ III
The PIEZONIZER AGZⅡ-PA is a compact and lightweight air gun type ionizer that eliminates static electricity from charged objects as well as a wave motion nozzle feature
to powerfully blow away dust attached by static electricity with pulses of air.
Features:
-Fits well into the operator’s hand and, at a lightweight 330g, greatly increases work efficiency.
-Wave motion nozzle powerfully blows away dust with pulses of air.
-High frequency AC method increases static elimination and achieves a good ion balance.
-Accompanying cable uses a robot cable and is very flexible.
-High voltage power supply and air valve are attached to the main unit so there is no need for a separate controller.
Specification :
MODEL: PIEZONIZER AGZ Ⅲ
Model | AGZ Ⅲ |
Input power supply | 24 VDC (AC adapter supplied; compatible with 100 to 240 VAC) |
Ion balance | ±15 V or less(at factory shipment) |
Supply airflow | Max. 370 Nℓ / min (ANR)(0.6 MPa) |
Ozone density | 0.04 ppm or less(at 200 mm) |
Operating Environment | 0 to 40℃ /65%RH or less (no condensation) |
Supply air range | 0.05 to 0.6 MPa |
Main unit dimensions | 164.6×25×135.8 mm (L×W×H)exc. protrusions. |
Weight | Approx. 200g (exc. cable) |
Accessories | Instruction manual, AC adapter |
SEMIKI-SHISHIDO PIEZONIZER AGZ III body
SEMIKI-SHISHIDO PIEZONIZER AGZ III cable
picture: SHISHIDO PIEZONIZER AGZ III at Semiki's warehouse
MODEL: PIEZONIZER AGZ Ⅲ-PA
Model | AGZ Ⅱ-PA |
Input power supply | 24 VDC (AC adapter supplied; compatible with 100 to 240 VAC) |
Current consumption | 0.1 A |
Ozone density | 0.04 ppm or less(at 200 mm) |
Fluid used | Clean air |
Operating Environment | 0 to 40℃/65%RH or less (no condensation) |
Supply air range | 0.3 to 0.6 MPa |
Main unit dimensions | 180×25×175 mm (L×W×H)(when wave motion nozzle is attached) |
Weight | Approx. 330g (when only the wave motion nozzle is attached) |
Standard Part | Operation manual, AC adapter, connector cable,wave motion nozzle, adjustable flow nozzle |
Picture: SEMIKI-SHISHIDO-AGZIII-PA
MODEL: PIEZONIZER AGZⅢ Air Controller OAGⅢ-CB
Model | OAGⅢ-CB |
Available model | AGZⅢ |
Power Voltage | 24 VDC (with AC adaptor AC100~240V use AGZⅢ adaptor) |
Electric Consumption | 0.2A (with AGZⅢ gun) |
Indication | Green: Supply the power and Air to AGZⅢ |
Supply Air | Clean and Dried air |
Available air pressure | 0.05MPa~0.7MPa |
Maximum air consumption | 500ℓ/min (ANR) only Contoller |
Air output control | CONT: Continuously blow, PULSE Hi: High Pulse blow (10Hz), PULSE Lo: Low Pulse blow (5Hz)*5 |
Input control | Open the INPUT port: Start to work, Close the INPUT port: Stop to work. |
Available Environment | 0 to 40℃ /85%RH or less (no condensation) |
Dimensions | 135×55×75 mm (W×H×D)exc. protrusions. |
Weight | Approx. 490g |
Accessories | Connecting cable with AC adaptor (2m), Connecting cable with AGZⅢ (0.3m), grounding cable, Air tubing (Φ6mm x 3m), Operation manual, |
Brush for PIEZONIZER AGZⅢ OAG-BRS | |||
Model | OAG-BRS-1 | OAG-BRS-2 | OAG-BRS-3 |
Available model | AGZ/ANZ series | ||
Materials of the brush | nylon | ||
Thickness of brush fibers | diameter Φ0.1 mm | diameter Φ0.2 mm | diameter Φ0.3 mm |
===========
Contact :
There are a variety of ways to get in touch with the Precision Measurement Professionals at Semiki Corp.
Please use the contact information on this page : www.semiki.com to get in touch with us.
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
address : 63 Ho Ba Kien St., 15 Ward, Dist.10, HCMC, VN
~DOING OUR BEST FOR YOU~