Semiki Corp - +84 28 2253 3522 - email: sales@semiki.com

thiết bị đo cân bằng ION, tĩnh điện SIMCO EA-5J

thiết bị đo cân bằng ION, tĩnh điện SIMCO EA-5J

thiết bị đo cân bằng ION, tĩnh điện SIMCO EA-5J

thiết bị đo cân bằng ION, tĩnh điện SIMCO EA-5J

thiết bị đo cân bằng ION, tĩnh điện SIMCO EA-5J
thiết bị đo cân bằng ION, tĩnh điện SIMCO EA-5J

Sản Phẩm

  • thiết bị đo cân bằng ION, tĩnh điện SIMCO EA-5J

  • Giá : Liên hệ
  • MASP : EA-5J
  • Nhà sản xuất : SIMCO ION
  • Charge Plate monitor EA-5J : For the evaluation and maintenance of ionizers. ・For the evaluation of ESD static control products. ・For the ESD static control educational purpose

Chi tiết Sản phẩm Chi tiết Sản phẩm

 

 

SIMCO Hand held Charge plate Monitor
Model : EA-5J

 

Special features : 

・Compact, light weight and easy to use operation
・Decay time and Ion balance can be measured with one touch operation.
・1000 measurement values can be stored.
・Measurement parameters can be selected depends on the type of ionizer.
・Analog output is equipped.
・Standard plate is complied with ANSI/ESD-STM3.1-2000. Small plate helps to measure for the hard to reach place.

 

Application:

・For the evaluation and maintenance of ionizers.
・For the evaluation of ESD static control products.
・For the ESD static control educational purpose.

 

 


Specification : 

 

 

 

Picture: simco EA-5J at Semiki's warehouse

 

Manual Measurement mode :

①Ion Balance measurement mode


Plate Voltage shows the average voltage (Average by which the maximum value and
minimum value are excluded from the measured data of every 20 ms)
0.2s:Average data of 8 points sampling data
1s:Average data of 48 points of sampling data
5s:Average data of 248 points of sampling data
10s:Average data of 498 points of sampling data
The setting of measuring time (10sec, 30sec, 60sec)
Peak and valley value of within a setting measuring time will be dispalayed.


②Decay time measurement mode


Plate Voltage shows the average voltage (Average by which the maximum value and
minimum value are excluded from the measured data of every 20 ms)
The display of Decay time (Fast mode:0.1sec~99.9sec, Slow mode 100sec~300sec.
The setting of measuring time(10sec,30sec,60sec,120sec,300sec)
Each Positive and negative polarity can be measured.
Finish voltage can be changed (5V~100V every 5V steps)

 

Automatic measurement mode


・Ion Balance measurement :
According to set measuring time, it automatically measures average value, Peak and
valley values.
・Decay Time measurement :
It measures positive and negative decay time according to the set measuring time.
・Store the data :
Store the data after fnishing the measurement by pressing save button. (1000 values
max) Stored data (CSV) can be downloaded through USB (mini B) connector on side

 

Display


①LCD Display
・Voltage and Time
・Error message, Battery status
・Bar type indicator for Ion Balance
・Operating mode (Au,Ma,Pc,ib[Ion Balance]±dE[Decay],ERROR


②LED Status indicatror
・HV:out Apply the high voltage to the plate
・GND:Plate is grounded
・Each operating buttons lights up for mode indication.
・CHARGE:Charging the battery

 

 

Contact : 

There are a variety of ways to get in touch with the Precision Measurement Professionals at Semiki Corp.
 Please use the contact information on this page : www.semiki.com to get in touch with us.


Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
address : 63 Ho Ba Kien St., 15 Ward, Dist.10, HCMC, VN

 

~DOING OUR BEST FOR YOU~

 

 

 

 

Các sản phẩm khác

SIMCO Ionizing Air Blower 6432E

Chi tiết

bể làm nóng dung dịch hàn -hakko Solder pot FX-301B

Chi tiết

MÁY DÒ CAO ÁP CẦM TAY SIMCO TENSION

Chi tiết

MŨ CHỐNG TĨNH ĐIỆN PHÒNG SẠCH ASONE

Chi tiết

máy đo độ tĩnh điện HOZAN Z-201, Z-201-TA

Chi tiết

thiết bị đo độ tĩnh điện shishido STATIRON DZ4

Chi tiết

Yêu cầu báo giá

Fanpage