THIẾT BỊ GHI , PHÂN TÍCH CÔNG SUẤT HIOKI PW3360

Sản Phẩm

THIẾT BỊ GHI , PHÂN TÍCH CÔNG SUẤT HIOKI PW3360
Giá : Liên hệ
MASP : PW3360-20, PW3360-21
Nhà sản xuất : HIOKI JAPAN
thiết bị đo công suất HIOKI PW3360 là thiết bị đo công suất đa kênh sử dụng đầu vào là cảm biến kẹp để đo công suất chính xác và an toàn trên các đường dây một pha đến ba pha. Máy có thể ghi dữ liệu năng lượng 3 pha 4 dây nhỏ gọn PW3360 theo dõi nhu cầu năng lượng và các thông số năng lượng khác để hỗ trợ kiểm toán năng lượng và xác nhận biện pháp tiết kiệm năng lượng

Chi tiết Sản phẩm

HIOKI CLAMP ON POWER LOGGER

MODEL:

PW3360-20 : English model, main unit only

PW3360-21 : English model, with harmonic analysis function

HIOKI Clamp On Power Meters PW3360 are multi-channel power measuring devices utilizing clamp sensor input to accurately and safely measure power on single-phase to three-phase lines. The PW3360 compact 3-Phase 4-Wire energy loggers monitor power demand and other power parameters to aid in energy audits and validate energy saving measures.

Key Features:

• Supports single to three-phase, 4-wire circuits

• Measure between 90V to 780V

• Simultaneously measure up to three single-phase, 2-wire circuits (in the same power system)

• Slim, compact design that can be placed anywhere

• Store months of data on SD cards

• The QUICK SET function guides you in making the right connections

• Choose PW3360-21 for harmonic measurements up to the 40th order

Picture: HIOKI Clamp On Power Meters PW3360-20 Semiki's warehouse.

Specifications :

Measurement line & number of circuits	50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels
Measurement items	Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power (with lag/lead display), apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand, pulse input [PW3360-21 only]: Harmonic voltage level, harmonic current level, harmonic power level, content percentage, phase angle, total harmonic distortion (THD-F or THD-R), up to 40th order
Voltage ranges	600 V AC (Effective measurement range: 90.00 V to 780.00 V)
Current ranges	500.00 mA to 5.0000 kA AC (depends on current sensor in use), 50.000 mA to 5.0000 A AC (Leak clamp on sensor only)
Power ranges	300.00 W to 9.0000 MW (depends on voltage/current combination and measured line type)
Basic accuracy	Voltage : ±0.3% rdg. ±0.1% f.s Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy Active power : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (at power factor = 1)
Display update rate	0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication)
Save destination	SD memory card, or internal memory at real time
Data save interval	1 sec to 30 sec, 1 minute to 60 minutes, 14 selections
Save items	Measurement value save: Average only / Average, Max./Min. value, [PW3360-21 only]: Harmonic data save: Average only / average, max./min. value in binary format, Screen copy: BMP form (saved every 5 min. at minimum interval time), Waveform save: Binary waveform data
Interfaces	SD/SDHC memory card LAN 100BASE-TX: HTTP server function, remote settings via communication program, data download USB 2.0: When connected to a PC, the SD Card and internal memory are recognized as removable storage devices, remote settings via communication program, data download Pulse output: proportional to active power consumption when measuring integral power consumption, Isolated open-collector signal
Functions	Connection check, Quick Set navigation guide, clock, pulse input
Power supply	AC Adapter Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter) Battery Pack 9459: (DC 7.2 V, 3 VA, charging time 6 hr 10 m), 8 hours of continuous use (with back light off)
Dimensions and mass	180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002 180 mm (7.09 in) W × 100 mm (3.94 in) H × 67.2 mm (2.65 in) D, 830 g (29.3 oz) with PW9002
Accessories	Voltage cord L9438-53 ×1 set, AC adapter Z1006 ×1, USB cable ×1, Instruction manual ×1, Measurement guide ×1, Color clip ×1 set: red, yellow, blue, white/two each, for color-coding clamp sensors, Spiral tubes for grouping clamp sensor cords ×5

video: The Hioki PW3360-20 Clamp On Power Logger is a 1P2W to 3P4W power logger with 2GB SD card data storage for energy audits and monitoring energy usage.

Measure up to 780V, 5000A or 9MW of power to verify the effectiveness of energy saving initiatives.

Maintenance and calibration :

► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522

~DOING OUR BEST FOR YOU~