THƯỚC ĐO ĐƯỜNG KÍNH TRONG TECLOCK IM SERIES

THƯỚC ĐO ĐƯỜNG KÍNH TRONG TECLOCK IM SERIES

THƯỚC ĐO ĐƯỜNG KÍNH TRONG TECLOCK IM SERIES

THƯỚC ĐO ĐƯỜNG KÍNH TRONG TECLOCK IM SERIES

THƯỚC ĐO ĐƯỜNG KÍNH TRONG TECLOCK IM SERIES
THƯỚC ĐO ĐƯỜNG KÍNH TRONG TECLOCK IM SERIES

Sản Phẩm

  • THƯỚC ĐO ĐƯỜNG KÍNH TRONG TECLOCK IM SERIES

  • Giá : Liên hệ
  • MASP : IM-880, IM-881, IM-882, IM-1, IM-2, IM-3, IM-4, IM-5
  • Nhà sản xuất : TECLOCK
  • TECLOCK Internal Dial Caliper Gauge: These gauges are designed for use in measuring deep internal diameter of bores of castings etc, and for internal reading in fabrications. Clearance has been provided for use in recessed bores. The convenient retraction lever allows one-hand operation

Chi tiết Sản phẩm Chi tiết Sản phẩm

TECLOCK Internal Dial Caliper Gauge
MODEL: IM SERIES

 

- Internal caliper gauge to measure internal diameter of cylindrical workpiece and recessed groove diameter.

It can measure groove diameter of"O" ring by modifying spare contact point.

- Set dimension within ±1mm (indication range 2mm) can be comparatively measured (880 series) by alternatively using auxiliary spare contact point in accordance with measured dimension.

- Please set standard dimension within measuring range with micrometer or ring gauge.

 

 

Picture: teclock-Internal Dial Caliper-IM881 set ( 30~62 mm/ 0.01mm) at Semiki's warehouse

 

 

 

 

Copyright ©  SEMIKI Corporation. All rights reserved.

Contact : 

There are a variety of ways to get in touch with the Precision Measurement Professionals at Semiki Corp.
 Please use the contact information on this page : www.semiki.com to get in touch with us.


Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
address : 63 Ho Ba Kien St., 15 Ward, Dist.10, HCMC, VN

 

~DOING OUR BEST FOR YOU~

 

Các sản phẩm khác

chân đế tự động cho máy đo lực IMADA MX2 Series

Chi tiết

MÁY ĐO ĐỘ DÀY LỚP PHỦ SƠN J-NDK UDM-1100 ( 50mm)

Chi tiết

thước cặp điện tử Kanon digital Centerline calipers

Chi tiết

Bộ thước đo tuyến tính Ono sokki linear gauge GS Series

Chi tiết

Thước đo lỗ đồng hồ- 6 - 10mm Mitutoyo

Chi tiết

Máy đo độ dày lớp phủ Delfesko DFT

Chi tiết

Yêu cầu báo giá

Fanpage