Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / ORP Controller for Swimming Pool Combined with Metering Pump BL101
Product portfolio

ORP Controller for Swimming Pool Combined with Metering Pump BL101

Producer:
SKU: HANNA-BL101 Category:

Developed to be a cost-effective solution for swimming pools and maintenance companies to maintain continuous ORP levels, Controller combined with ORP BL101 metering pump is a system designed to maintain the pH of swimming pools and spas. Simply insert the electrode and relief valve into the pipeline with the circulation pump and deliver the chemical to be dosed.

ORP control screen combined with pump

Supplied with complete electrodes and necessary accessories

Specialized in swimming pools 

There are 3 options:

– BL101-00: basic

– BL101-10: comes with accessories installed in the pipeline

– BL101-20: comes with installation accessories in the measuring cup

 

 

BL101 is a system designed to maintain the ORP of swimming pools and spas. Typically liquid chlorine is used as a disinfectant to keep water safe from harmful bacteria. Chlorine, as an oxidizer, will increase the oxidation redox potential (ORP) of water when added to it. When the ORP value is greater than 650mV, the bacteria present will be destroyed within a few seconds. BL101 was developed to be a cost-effective solution for consumers to maintain ideal ORP at all times. Simply install the probe and injection valve in line with the circulation pump and deliver the chemical to be dosed.

 

 

 

 

Peristaltic DOSING PUMP

The internal peristaltic pump uses a stepper motor without any gears or brushes providing long life and requiring less maintenance.

PROPORTIONAL AUTOMATIC PUMP CONTROL

Peristaltic metering pumps can have simple on/off control or more advanced proportional control prevent overdosing.

PUMP FLOW CONTROL

Pump flow is adjustable from 0.5 to 3.5L/h, allowing greater control in maintaining the desired set point.

 

 

ACID LEVEL IN TANK/FLOW SWITCH

An option to connect an acid level or flow sensor. This input can be used to disable the metering pump when there is no chemical left in the tank or there is no flow due to the pump being turned off.

MULTI-COLOR LCD SCREEN

Easily and quickly view and monitor control status for the pool. 

The background screen will display green during normal operation and red during alarm status.

QUICK CONNECT INPUT

Quick Connect DIN connector with waterproof seal minimizes electromagnetic interference problems from electrical connections in wet environments cause .

 

HI20083

ORP/SWIMMING POOL TEMPERATURE PROTECTOR

The BL1001 uses the HI20083 amplified probe that combines both ORP and temperature sensors and connects to the controller with a single waterproof Quick Connect DIN connector.

– Body made of PVDF

– Fits 1/2″ thread for installation in T-shaped or flow pipes.

 

 

 

SPECIFICATIONS

SKU

BL101

ORP scale 

-2000 to 2000 mV

Resolution ORP 

1 mV

Accuracy ORP (@25°C/77°F)

±5 mV

Temperature Scale

-5.0 to 105°C (23.0 to 221.0°F)

Temperature Resolution

0.1°C (0.1°F)

Temperature Accuracy (@25°C/77°F)

±0.5°C (±0.9°F)

Temperature compensation

Automatic

Calibration

User calibration: automatic, 1 or 2 points (4.01, 7.01, 10.01 pH)
Control calibration: 1 point, customizable (±0.50 pH around measured pH point)

Pump

Adjustable flow (0.5 to 3.5 L/hour)
Manual control for priming pump

Alarm

– Upper threshold, Lower threshold (optional to enable/disable alarm function)

– Activate the alarm function after 5 seconds, if the controller continuously records a set of measurement values above/below the set threshold

alarm (optional enable/disable alarm function)

– Over-pump protection function (1 to 180 minutes or off)

– Visual alarm system uses red, light blue and green backlighting.

External trouble alarm input

Level control input or flow switch to disable metering pump…using flow switch. Voltage isolation

Alarm Relay Output

SPDT 2.5A / 230 VAC

Electricity supply

100—240 VAC, 50/60 Hz

Power consumption

15 VA

Machine case

Wall mounted, integrated pump, IP65 standard

Environment

0-50°C (32-122°F),RH max 95% non-condensing

Size

90 x 142 x 80 mm

Mass

910 g

Guarantee

12 months for machine and 6 months for electrodes

Supply includes

BL101-00

– BL101 screen

– HI20083 Quick DIN port ORP/temperature electrode

– Wire

– User manual

– Quality certificate for machine and electrodes

BL101-10 (with in-pipe installation kit)

– BL101 screen

– HI20083 Quick DIN port ORP/temperature electrode

– Doll

– Van spray

– Mount for 50 mm pipe with ½ thread (2)

– PVC suction hose (flexible hose) (5 m)

– PE pump tube (hard tube) (15 m)

– Valve (2)

– ORP Calibration Solution (3 packs of 20mL)

– Wire

– User manual

– Quality certificate for machine and electrodes

BL101-20 (with installation kit in measuring cup)

– BL101 screen

– HI20083 Quick DIN port ORP/temperature electrode

– Measuring cell for BL100/BL101

– Installation bracket for BL100/BL101

– Doll

– Spray valve

– Mount for 50 mm pipe with ½ thread (2)

– PVC suction hose (flexible hose) (5 m)

– PE pump tube (hard tube) (15 m)

– ½”- 6mm tube adapter with racord (2)

– Valve (2)

– ORP Calibration Solution (3 packs of 20mL)

– Wire

– User manual

– Quality certificate for machine and electrodes

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Floor 12 – Tower A2, Viettel Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City, Vietnam
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • 10th Floor, Halo Building, 19-19/2A Ho Van Hue, Ward 9, Phu Nhuan District, HCMC
Representative office in Hanoi:
  • 9th Floor, 3D Building, No. 3 Duy Tan Street, Dich Vong Hau Ward, Cau Giay District, Hanoi City
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.