Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

TAKIKAWA TMG SERIES DIAMETER CALIBRATION KIT

Producer: TAKIKAWA

Category: Standard measuring tools

Calibration gauge /Gauge pin Unit /Fixture for TM/TMS Series

TAKIKAWA Japan

Calibration gauge

Gauge pin Unit TMG Series

and Fixture 01,02,05…

for TM/TMS Series

Gauge Fixture / Calibration gauge unit for Surface Variation Detector

Outside diameter concave-convex detector – TM calibration

Gauge Fixture and corresponding gauge unit table

Picture: Pin gauge TMG-05 with fixture 06B calibration system for TM-1003W at Semiki's warehouse

SEMIKI will explain with 1 axis as an example.

1.Set the Gauge Fixture according to the axis for calibration (this time, 1 axis). (The figure below)
2.Set the level setting dial to “1.00”.
3.Insert the gauge tip quickly into the center of the measuring range. At this time, please insert gauge so as not to be affected as much as possible.
4.When the gauge tip is inserted while repeating the insertion several times, adjust the gain setting VR of 1 axis the lowest to light up the detection alarm lamp.(herein after lamp)
＊ It is not abnormal although the lamp may light up when extracting the tip of the gauge.
＊ Set an interval of about 3 seconds after the lamp is turned off when repeating the insertion of the gauge tip.
＊ VR for gain setting increases sensitivity when turned clockwise, and decreases when turning it counterclockwise.
Change the level setting dial to “1.03”.
Repeat the insertion of the gauge tip in the same way.Now adjust the VR for 1 axis gain adjustment so that the lamp does not light up when inserting the tip of the gauge.
The calibration will be completed after repeating steps (2) – (6) several times to light up at “1.00” and not light up at “1.03”.

Example of calibration method TM-3004W use Pin gauge TMG – 10, Gauge Fixture 10B

Example of calibration method TM-1003W use Pin gauge TMG -05, Gauge Fixture 06B

Maintenance and calibration :

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP