Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

Mini TDS Controller (0.00 – 10.00 g/L) BL983318-1

Producer: HANNA Instruments

SKU: HANNA-BL983318-1 Category: Hanna experimental measuring equipment

Continuous TDS measurement and control

Measuring range from 0.00 to 10.00 g/L (ppt)

No 4-20mA analog output

Multi-color LED alarm light

HI7632 electrode (purchased separately)

Fixed dose distribution relay

The BL983318 has a default dosing relay that is a closed contact when above the user programmed mV setting point.

Overdose protection

The mini controller can be programmed to shut off a valve, pump, or connected device when continuously activated for more than a selected period of time; adjustable from 5 to 30 minutes.

Multi-color LED lights allows the operator to quickly check the status of the controller.

+ Green = Measuring mode and value is below set point.

+ Orange / Yellow = Value is above setpoint and relay is activated.

+ Flashing red = Indicates an alarm condition such as when the maximum medication time is exceeded.

Switch control mode

With just one switch, normal “Auto” operation can be converted into “ON/OFF” mode.

Protective dosing

The mini controller is protected against a maximum of 2A load from one pump or connected device.

Connect peripheral devices easily

Quick and easy terminal connection to power, communications, dose control, or sensors.

hi7632-2100x2100-15de3c98-5644-4496-bf7b-252e92223934

AMPEROMETRIC PROBE 1/2″ NPT MALE THREAD HIGH LEVEL

The BL983318 mini controller uses the same HI7632-00 conductivity probe available with 2 m or 6 m cable lengths.

* HI7632-00 is not included and must be buy separately

+ HI7632-00: 2m cable

+ HI7632-00/6: 6m cable

SPECIFICATIONS

The scale	0.00 to 10.00 g/L (ppt)
Resolution	0.01 g/L (ppt)
Accuracy (@25°C/77°F)	± 2% full scale
TDS conversion factor	0.5
Calibration	Manual, 1 point with CAL fine tuning button
Dosage division	Maximum 2A (protective fuse), 250 Vac, 30 VDC
Choose dosage	contact closes when measuring point > set point
Installation point	Customizable from 0 to 10 ppt (g/L)
Overdose	Customizable from 5 to nearly 30 minutes
Heat compensation	Automatic from 5 to 50°C (41 to 122°F) with β =2%/ºC
Probe	HI7632 with 2m or 6m cable (purchase separately)
Electricity supply	BL983318-0: 12 VDC adapter (included); BL983318-1: 115/230VAC; 50/60Hz
Size	83 x 53 x 99 mm
Mass	BL983318-0: 200 g. BL983318-1: 300 g.
Supply includes	– BL983318 screen. – Transparent plastic case protects the screen. – Mounting frame. - User manual. + BL983318-0: comes with 12 VDC adapter. + BL983318-1: uses 115/230VAC; 50/60Hz HI7632 PROBE PURCHASED SEPARATELY
Guarantee	12 months