Force and mechanical measuring equipment
– Measure pH/Conductivity(EC)/Total Dissolved Solids (TDS)/Temperature.
– Compact, pocket-friendly design.
– The pH electrode is removable and replaceable.
– Automatic temperature compensation.
– TDS coefficient 0.5 (clean water) or 0.7 (hydroponics)
– HQuick pH and EC/TDS calibration with just 1 solution (Quick CAL)
– Meter included electrodes and standard solutions, electrode washing.
REMOVABLE pH ELECTRODES
The HI98131 waterproof, highly accurate EC/TDS meter with fabric junction.
Extended cloth junctions extend electrode life and replaceable pH electrode (HI73127)
Additionally, the replacement electrode has no pins so it won't bend or break.
EC/TDS GRAPHIC DETECTOR
The conductive graphite probe provides higher accuracy because it is not contaminated by salts in the solution.
AUTOMATIC TEMPERATURE COMPENSATION
The machine integrates a temperature sensor for quick response time and ensures temperature compensation for highly accurate measurement results.
AUTOMATIC QUICK CAL
– With only 1 HI50036 solution to calibrate pH.EC.TDS at the same time without having to calibrate each point separately.
– In addition, the machine can also calibrate each pH and EC/TDS index.
+ pH: Calibration at 2 points at pH 4.01 / 7.01 / 10.01
+ EC/TDS: 1 point calibration at 1.41 mS/cm or 5.00 mS/cm
HOLD BUTTON
Helps keep a stable value on the screen to facilitate recording and storing measurement values
STABLE SYMBOL
The hourglass icon will flash during measurement and disappear to indicate that the measurement result has stabilized and this value has been taken.
SUPPLIED COMPLETE SET WITHOUT PURCHASING ANYTHING ADDITIONAL
– Meter and internal pH, EC and temperature electrodes
– Quick calibration solution
– Electrode cleaning solution immediately after measurement
HOW TO CALIBRATE, SET UP AND USE THE MACHINE
SPECIFICATIONS
pH |
|
The scale |
0.00 to 14.00 pH |
Resolution |
0.01 pH |
Accuracy |
±0.1 pH |
Temperature compensation |
Automatic |
CONDUCTIVITY (EC) |
|
The scale |
0.00 to 6.00 mS/cm |
Resolution |
0.01 mS/cm |
Accuracy |
±2% full scale |
Temperature compensation |
automatic with default β 1.9%/°C |
TOTAL DISSOLVED SOLIDS (TDS) |
|
The scale |
0 to 3000 ppm (500 CF) 0 to 3999 ppm (700 CF) |
Resolution |
10 ppm (mg/L) |
Accuracy |
±2% full scale |
Temperature compensation |
automatic with default β 1.9%/°C |
TEMPERATURE |
|
The scale |
0.0 to 60.0°C / 32.0 to 140.0°F |
Resolution |
0.1°C / 0.1°F |
Accuracy |
±0.5°C /±1°F |
OTHER SPECIFICATIONS |
|
Calibration |
Automatic in 2 ways: – Quick CAL 1-point common calibration for pH, EC, TDS with HI50036-0 quick standard solution packet – Individual calibration: + pH : 2 points at pH4.01, pH7.01, pH10.01 + EC and TDS: 1 point at 1.41 mS/cm or 5.00 mS/cm |
TDS conversion factor |
0.5 (500 ppm) or 0.7 (700 ppm) |
The battery |
4 1.5V batteries/ about 100 hours of continuous use |
Automatically turns off |
after 8 minutes, 60 minutes, or no activation |
Environment |
0 to 50°C (32 to 122°F); RH max 100% |
Size |
163 x 40 x 26 mm |
Mass |
100g |
Guarantee |
06 months for the body and 03 months for the electrodes (for products with intact tags and warranty card) |
Supply includes |
– HI98131 meter – Removable HI73127 pH electrode (inside the meter) – EC/TDS electrode (fixed in the machine) – Temperature sensor (fixed in the machine) – 4 HI50036-0 Quick Calibration Solution Packets – 1 packet of electrode cleaning solution immediately after measurement – Battery (in device) – User manual – Warranty – Quality Certification – Paper container |