Force and mechanical measuring equipment
Cedar Torque Tester
Model: CD-10M
Measuring range:
0.010~1 N・m/ 0.10~10 kgf・cm/ 0.10~9 lbf・in
About accessories
All products come with a free Calibration Certificate, Test Sheet and Traceability Chart.
You can use those documents as part of your customer's quality system immediately after purchase.
Upgrade Major components have changed
(1) In the display panel, “measurement mode”, “measurement unit”, “maximum value, minimum value
min, average, etc”,. display.
(2) Can change measurement unit Nm <=> kgf-cm <=> lbf-in, etc.
(3) Various numeric values can be set easily and quickly.
(4) Calculating maximum, minimum and average values becomes easy to understand.
(5) Calling stored data becomes easy. Output data also becomes easy to understand.
(6) Charging error protection. It is the indicator light that is on during charging.
(7) The output data is USB Form (Type B).
(8) Memory data is 800 times
(9) Real-time output is Every 1/180 second.
The best for everyday checking of an electric driver
► Everyday check of an electric driver can be performed.
► Since various information is displayed on a display board, it is very intelligible.
► The change of a measurement unit can be performed.
► Memory data is 800 affairs.
► Real-time output Every about 1 / 180 secondS
Feature :
– Show “Measurement mode”, “Measurement unit”, “maximum, minimum, average”
– Switchable measurement unit
– Enable to save 5 sets of settings such as upper limit and lower limit
– 800 items of memory data
– Real-time output About every 1/180 seconds
– Data acquisition software can be downloaded for free
Torque tester
Model: CD-10M
Range:
0.010~1 N・m/ 0.10~10 kgf・cm/ 0.10~9 lbf・in
Picture: Cedar CD-10M (0.01~1N.m) at Semiki's warehouse
About accessories
A Calibration Certificate, Inspection Sheet and Traceability Chart are appended to all the products for free.
You can use those documents as part of a customer's quality system right after purchasing.
video: Cedar CD-100M ( 1~100 Kgf.cm) torque screwdriver | intro (Vietnamese)
Upgrade The main changed parts
(1) In a display board, “measurement mode”, a “measurement unit”, “the maximum, the
minimum, an average, etc.”,. display.display.
(2) Change of Measurement Unit Can be Performed Nm <=> kgf-cm <=>lbf-in Etc.
(3) Setup of Various Numerical Values Can be Easy and Can Carry Out Speedily.
(4) Calculation of Maximum, Minimum, and Average Became Intelligible.
(5) The call of the saved data became easy. The output of data also became intelligent.
(6) Fault charge protection. It is pilot-lamp lighting during charging.
(7) Data Output is USB Form (B Type).
(8) Memory Data are 800 Affairs
(9) Real-time Output is Every 1 / 180 Seconds.
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~