Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

CEDAR DI-1M-IP50 electronic torque meter (0.30~50 N･m)

Producer: CEDAR SUGISAKI

Category: Tightening force testing device

SUGISAKI Japan
Digital Torque Tester for Pneumatic Tools & Impact Wrenches
Model: DI-1M-IP50
Range: 0.30～50 N･m / 3.0～500 kgf・cm/ 3.0～450 lbf・in
Accuracy ±0.5% (499 digits or less ±3 digits)
Management of impact tools and oil pulse tools etc.
Suitable for impact-based tool management
High precision and portable. Installed on the working line and effective for periodic inspection of instruments.
Impact counter displays the number of impacts and torque value, the LED display is brighter and easier to read.
Also can be used to manage torque wrenches · nuts.

SUGISAKI Japan

Digital Torque Tester

for Air Tools & Impact Wrenches

Model:

DI-1M-IP50 ( 50N/5Kgf )

Cedar DI-1M-IP Series torque testers are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power or manual driver.

These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds.

These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/Nm units are selectable.

USB output, auto zero reset, auto shutoff and low battery indicator complete the set of features.

It is powered by an internal NiCad battery or the included AC adapter.

SUGISAKI Japan
Digital Torque Tester for Air Tools & Impact Wrenches
Model:DI-1M-IP50
Range: 0.30～50 N･m / 3.0～500 kgf・cm/ 3.0～450 lbf・in
Accuracy ±0.5% (499 or less digits±3digit)
Management of Impact tools and oil pulse tools etc.

Pic.: Digital Torque Tester for Air Tools & Impact Wrenches
CEDAR DI-1M-IP50 (0.30～50 N･m) at Semiki's warehouse

Features

► Suitable for Impact-based tool management. High accuracy, and portable. It is installed on the work line and is effective for periodic inspection of the tool. The blow counter displays number of blows and value of torque, and LED display which is brighter and easier to read.

• Besides, it can be used for the management of the torque wrench · nut runner.

• Blow counter shows number of blows and value of torque

• Enable to inspect operating torque of manual preset type torque wrench etc. print peak down mode

• Auto power-off function · Autoclear function are installed

• Data acquisition software can be downloaded for free

• Easy to read LED panel displays reference torque value in lbf-ft, kgf-m and Nm (selectable); and number of blows for selected period (0.1 – 9.9 sec)

• Peak, Real Time and Peak Down measuring modes (selectable)

• Ergonomic light weight, torque tester with heavy duty metal construction