Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

CEDAR DI-9M-08 screwdriver torque tester (2.0-800 mN･m)

Producer: CEDAR SUGISAKI

Category: Electric screwdriver leveling machine

SUGISAKI Japan
CEDAR Electric Screwdriver Torque Tester
Model: DI-9M-08
Measuring range:
2.0-800 mN･m /0.020～8 kgf・cm/ 0.020～7 lbf・in
Accuracy ±0.5% (499 digits or less ±3 digits)
Socket size □ 20mm/ □ 9.5mm
Suitable for daily testing of electric screwdrivers
Use “OW coupling” (coupling without rewinding)
Allows saving of 5 channels of pass/fail criteria and allows changing of settings by switching channels even if the tightening period changes.
Due to “OW Coupling”, effective measurement is possible without rewinding.
Display “Measurement mode”, “Measurement unit” and “maximum, minimum, average”
Convertible units of measurement
800 Data Items Memory
Real-time output About every 1/180 second
Free data collection software available for download
Includes “Screw Cube” – measuring tool for manual tools

SUGISAKI Japan

CEDAR Electric screw driver Torque tester
Model: DI-9M-08

Suitable for daily inspection of electric screw driver
Using “OW joint” (joint which is unnecessary to rewind)
Enable to save 5 channels of pass/fail judgment criterion, and enable to change settings by switch channels even if the tightening term changes.
Due to “OW Joint”, able to mesures effectively without rewinding.

SUGISAKI Japan
CEDAR Electric screw driver Torque tester
Model: DI-9M-08
Measuring range:
2.0-800 mN･m /0.020～8 kgf・cm/ 0.020～7 lbf・in
Accuracy ±0.5% (499 digits or less ±3digit)
Socket size □ 20mm/ □9.5mm

Pic.: CEDAR Electric screw driver Torque tester Model: DI-9M-08 at Semiki's warehouse
Measuring range:
2.0-800 mN･m /0.020～8 kgf・cm/ 0.020～7 lbf・in

Show “Measurement mode”, “Measurement unit”, and “maximum, minimum, average”
Switchable measurement unit
800 items of Memory data
Real-time output About every 1/180 seconds
Data acquisition software can be downloaded for free
Include “Screw Cube”-measuring jig for manual tools