Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

CEDAR DI-9M-8 Screwdriver Torque Tester (0.020-8 N･m)

Producer:

Category: SEMIKI measurement solution

SUGISAKI Japan
Máy kiểm tra lực xoắn tua vít điện CEDAR
Model: DI-9M-8/08
Measuring range:
0,020-8 N･m /0,20～80 kgf・cm/ 0,20～70 lbf・in
Độ chính xác ±0,5% (499 chữ số hoặc ít hơn ±3 chữ số)
Kích thước ổ cắm □ 20mm/ □9,5mm
Suitable for daily testing of electric screwdrivers
Sử dụng “khớp nối OW” (khớp nối không cần tua lại)
Cho phép lưu 5 kênh tiêu chí đánh giá đạt/không đạt và cho phép thay đổi cài đặt bằng cách chuyển kênh ngay cả khi thời hạn siết thay đổi.
Do “Khớp nối OW”, có thể đo hiệu quả mà không cần tua lại.
Hiển thị “Chế độ đo”, “Đơn vị đo” và “tối đa, tối thiểu, trung bình”
Đơn vị đo có thể chuyển đổi
800 mục dữ liệu Bộ nhớ
Đầu ra thời gian thực Khoảng 1/180 giây một lần
Có thể tải xuống phần mềm thu thập dữ liệu miễn phí
Bao gồm “Screw Cube” – dụng cụ đo cho các công cụ thủ công

SUGISAKI Japan

CEDAR Electric screw driver Torque tester
Model: DI-9M-8

Suitable for daily inspection of electric screw driver
Using “OW joint” (joint which is unnecessary to rewind)
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings by switch channels even if the tightening term changes.
Due to “OW Joint”, able to mesures effectively without rewinding.

SUGISAKI Japan
CEDAR Electric screw driver Torque tester
Model: DI-9M-8
Measuring range:
0.020-8 N･m /0.20～80 kgf・cm/ 0.20～70 lbf・in
Accuracy ±0.5% (499 digit or less ±3digit)
Socket size □ 20mm/ □9.5mm

Pic.: CEDAR Electric screw driver Torque tester Model: DI-9M-8 at Semiki's warehouse
Measuring range:
0.020-8 N･m /0.20～80 kgf・cm/ 0.20～70 lbf・in

Show “Measurement mode”, “Measurement unit”, and “maximum, minimum, average”
Switchable measurement unit
800 items of Memory data
Real-time output About every 1/180 seconds
Data acquisition software can be downloaded for free
Include “Screw Cube”-measuring jig for manual tools