MANUFACTURER
SUGISAKI Japan
CEDAR Digital Torque Screwdriver
Model: DID-4
Measuring range 0.020～4 N･m 0.20～40 kgf・cm 0.20～35 lbf・in
Accuracy ±0.5％ (499 or less digits ±3 digits)
Display 4-digit LCD digital display
For final tightening and checking of screws & bolts
Light and compact with built-in display!
Wireless type and improved operability. Allows stable measurement for long-term continuous use.
Screw tightening counter function is also installed as standard.
Allows saving of 5 channels of pass/fail criteria and allows easy setting changes by switching channels even when the tightening deadline changes.
Feature :
• The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed
• Peak, Real Time and Peak Down measuring mode (selectable)
• 800 data memory
• Programmable High and Low set points with both audible beep and Green/Red LED indicator for
uniform torque tightening or GO/NO GO testing
• Programmable screw tightening counter
• Programmable Auto Zero function resets unit to zero for easy operation
• Both CW and CCW operate
• ASCII format output (USB)
• Runs on internal NiMH batteries (for 12 hours) Auto shut-off after 10 min. of non-use.
CEDAR Digital torque driver
Model: DID-4
Measuring range 0.020～4 N･m 0.20～40 kgf・cm 0.20～35 lbf・in
Accuracy ±0.5％ (499 or less digits±3digit)
Display The 4 figures digital display of LCD
Picture: Cedar digital torque Srewdriver DID-4 ( 0.02Nm to 4 Nm / 0.2 kgf.cm to 40 kgf.cm ) at Semiki's warehouse.
For tightening and final checking of screws & bolts
Lightweight and compact with integrated display!
Cordless type and improves operability. Enable to stably measure for long continuous use.
Screw tightening counter function is also installed as standard.
Enable to save 5 channels of pass/fail judgment criterion, and enable to change settings easily by switch channels even if the tightening term changes.
Video: Digital torque screwdriver DID-4 / intro ( Vietnamese)
Maintenance and calibration :
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~
