Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

CEDAR DIW-15 electronic torque wrench 0.20~15N.m, socket 1/4 inch

Producer: CEDAR SUGISAKI

Category: Electronic torque wrench

SUGISAKI Japan
CEDAR Digital Torque Wrench
Model: DIW-15
Range: 0.20～15 Nm /2.0～150 kgf.cm / 2.0～130 lbf.in
Socket: 1/48 inch (6.35mm)
Accuracy: Reading ±0.5% (499 digits or less ±3 digits)
Set count from 1 to 99 counts (clockwise count)
For final tightening and checking of screws & bolts
The wrench head can rotate about 300 degrees! The eye and display panel are always parallel and improve operability.
Light and compact with built-in display!
Cordless type and improved operability. Allows stable measurement for long-term continuous use. Screw tightening counting function is also installed as standard.
Allows saving of 5 channels of pass/fail criteria and allows easy setting changes by switching channels even when the tightening deadline changes.

SUGISAKI Japan

CEDAR Digital torque wrench
Model: DIW-15

For tightening and final checking of screws & bolts
The wrench head part can rotate about 300 degrees! The eyes and the display board can be always parallel and improve operability.
Lightweight and compact with integrated display!
Cordless type and improves operability. Enable to stably measure for long continuous use.Screw tightening counter function is also installed as standard.
Enable to save 5 channels of pass/fail judgment criterion, and enable to change settings easily by switch channels even if the tightening term changes.

SUGISAKI Japan
CEDAR Digital torque wrench
Model: DIW-15
Range: 0.20～15 Nm /2.0～150 kgf.cm / 2.0～130 lbf.in
Accuracy: Reading ±0.5% (499 or less digits±3digit)

Socket: 1/4 inch (6.35mm)

Setup of count 1 to 99 count (count in a clockwise direction)

Picture: Cedar digital torque Wrench DIW-15 at Semiki's warehouse.

Feature :

• Ergonomic, light weight, rugged metal construction
• Wrench head swivels 300°
• Peak, Real Time and Peak Down measuring mode (selectable)

• 800 data memory
• Programmable High and Low set points with both audible beep and Green/Red
• LED indicator for uniform torque tightening or GO/NO GO testing
• Both CW and CCW operate
• USB output (ASCII format)
• Runs on internal Ni-MH batteries (12 hour use)
• CW step less one-way clutch adapter (DIW-20/75/120 only), AC charger and carrying case included.