HOTLINE: +84 979761016
Force and mechanical measuring equipment
The Testo 0636 2161 humidity measuring probe can be used in combination with the testo 635. With a temperature measuring range of up to 125 °C it allows you to use this probe in exhaust air ducts.
The Testo 0636 2161 measuring probe is used to measure temperature and humidity in warehouses, refrigerated areas, work areas or in air conditioning/ventilation ducts. In addition, with this probe you can carry out material balance moisture measurements. However, to do this, you need to activate the H2O calculation function and the material type must be set on the meter (anhydrite flowing screed, cement flowing screed, lime sand brick, concrete, high-insulation brick, solid brick, hard wood, soft wood, aerated concrete and particle board).
Note: This probe can be connected to the testo 635 thermo-hygrometer.
| Temperature – NTC | |
|---|---|
| Measuring range | -20 to +125 °C |
| Accuracy | ±0.4°C (0 to +50°C),
±0.5 °C (-20 to 0°C, +50 to +80°C) +1.2 % measured value (Remaining measuring range) |
| Humidity – Capacitance | |
|---|---|
| Measuring range | 0 to +100 %RH |
| Accuracy | ±2 %RH at +25 °C (+0 to +100 %RH)
±0.03 %RH/K (k=1) long-term stability: ±1 %RH / year *The sensor accuracy corresponds to the system accuracy. |
| General specifications | |
|---|---|
| Diameter probe shaft | 12mm |
| Length probe shaft | 300mm |
Electronic industry measuring equipment, Substance concentration measuring equipment, Viscosity measuring equipment
Substance concentration measuring device
Substance concentration measuring device
Substance concentration measuring device
Substance concentration measuring device
Substance concentration measuring device
Substance concentration measuring device
Substance concentration measuring device