Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

Conductivity/Temperature Electrode for Edge® HI763100

Producer: HANNA Instruments

SKU: HANNA-HI763100 Category: Hanna experimental measuring equipment

– HI763100 is a digital conductivity electrode

– Built-in temperature sensor.

- Electrode potentiometric with platinum sensors

– Measure high or low conductivity using just one probe.

– Integrated microchip to store calibration data

– 3.5 mm connection port

– For Hanna Edge series^®

MICROCHIP INTEGRATION

Stores serial number and calibration information including date, time, offset, slope, probe condition and buffer used. This information is automatically retrieved by edge^® when the electrode is inserted. Communication capability allows hot-swap probes without recalibration. All conductivity measurements are made in the electrode and transmitted digitally to the meter. This reduces noise associated with traditional high impedance analog measurement systems. Electrical noise can arise from the built-in temperature sensor and in humid environments.

POTENTIOMETRIC TECHNOLOGY

The four-ring potentiometric measurement system allows the probe to measure multiple samples while minimizing the effects of polarization. The two outer rings apply alternating voltages and create a current loop in the solution, while the two inner rings measure the voltage drop caused by the current loops. This allows samples with very high to very low values to be measured without changing electrodes.

HOLES ON THE ELECTRODE BODY

The electrode is enclosed in a chemically resistant plastic sleeve to prevent external interference with the sample.

INTEGRATED TEMPERATURE SENSOR

Since temperature is an important factor in measuring conductivity, a temperature sensor integrated into the probe is useful. No external temperature probe is required, so measurements can be made easily. The coefficient used to correct for temperature changes is β, expressed as a percentage per degree Celsius.

SPECIFICATIONS

Body material	P.E.I
Type	4 laps
Insulator	glass
Probe	platinum
The scale	0 to 200 mS/cm
Body length	120mm
Ideal temperature	-5 to 100°C (23 to 212°F)
Temperature sensor	Have
Amplification	Are not
Digital	Have
Compatible machines	edge multi-parameter (HI2020, HI2030, HI2040)
Cable	1m
Connector	3.5 mm
Guarantee	06 months
Supply includes	– HI763100 electrode – Warranty – Containers