– Polarographic, membrane type dissolved oxygen electrode
– Integrated temperature sensor.
– For use with Edge HI2004 or HI2040 Dissolved Oxygen Meter.
– 1m long cable
– 3.5mm digital port
– Thin, small electrode body
INTEGRATED DATA STORAGE MICROCUTE
Stores serial number and calibration information including date, time, offset, slope, probe status and buffers used. This information is automatically retrieved by edge® when the electrode is plugged in. The ability to transfer information allows hot swapping of probes without the need for recalibration. All DO measurements are taken in the electrode and transmitted digitally to the meter. This reduces noise associated with traditional high impedance analog measurement systems. Electrical noise can arise from the built-in temperature sensor and in humid environments.
ULTRA THIN ELECTRODE BODY ONLY 12mm
Allows convenient measurement in narrow locations such as test tubes and bottle necks.
REPLACEMENT MEMBRANE ELECTRODE
With screw cap design, PTFE membranes DO® can be easily replaced for faster maintenance.
3.5mm DIGITAL CONNECTION PORT
Easy to plug in, no alignment required
CABLE LENGTH
1m long
PARAMETER
Body material |
P.E.I |
Type |
Polarographic |
Anode |
Ag/AgCl |
Cathode |
Glass encapsulated Platinum |
The scale |
0 to 300% oxygen saturation |
Body length |
120mm |
Ideal temperature |
0 to 50°C (32 to 122°F) |
Temperature sensor |
Have |
Amplification |
Are not |
Digital |
Have |
Compatible machines |
edge multi-parameter (HI2020, HI2030, HI2040) or HI2004 |
Cable length |
1 meter |
Connector |
digital 3.5mm |
Guarantee |
06 months |
Supply includes |
– HI764080 dissolved oxygen electrode with 1m cable, 3.5mm port – Membrane cap (2 pieces) – O-rings (2 pcs) – HI7041S Membrane Fill Electrolyte Solution (30 mL) – Quality certification – User manual – Containers *Note: Remove the membrane cap (each membrane cap is only attached once, do not reuse) and pour out the electrolyte solution to fill the membrane. Only store it dry as in the original picture if not used for a long time because the electrolyte solution will corrode the electrode if no measurement is taken. |