Force and mechanical measuring equipment
– New Quick DIN port
– TPVDF is safe for use in food
– Specialized in measuring meat and semi-solid products
– For use with HI99163 and HI98163 pH meters
*Stainless steel blade not included
CINE-SHAPED ELECTRODE HEAD
The conical electrode tip allows penetration into solids, semi-solids, and emulsions for direct measurement of pH in food products, soils, and emulsions such as hand creams.
LOW TEMPERATURE GLASS – LT
A standard pH electrode using general purpose (GP) glass has an impedance of 100 megaohms at 25°C. The FC2323 uses LT (low temperature) glass which has an impedance of approximately 50 megaohms at 25°C. As the temperature of the glass decreases in the sample, the impedance of the LT glass approaches that of the GP glass. If GP glass is used, the impedance will increase above the optimum range, increasing the impedance and ultimately affecting the measurement. The FC2323 is suitable for use with samples that measure from -5 to 100°C.
COMBINED WITH STAINLESS STEEL BLADE FC099 or FC098 (purchased separately)
An optional stainless steel blade is attached to the probe for easy penetration of meat, even in frozen samples. Cutting into the meat will allow the pH glass and reference junction to come into contact with the sample, allowing direct pH measurement without extensive sample preparation. The FC098 (20mm; 0.75″) and FC099 (35mm; 1.38″) are two stainless steel blades used with the FC2323 electrode.
POLYVINYLIDENE FLUORIDE PLASTIC BODY (PVDF)
PVDF is a food grade plastic that is resistant to a wide range of chemicals and solvents, including sodium hypochlorite. PVDF plastics are abrasion resistant, mechanically strong, and resistant to ultraviolet and nuclear radiation. PVDF is also resistant to mold and mildew.
OPEN REFERENCE JOINT
Suspended solids and proteins commonly found in food products will clog the conventional ceramic reference junction, resulting in slower response times, erratic readings, and the need for electrode replacement. frequent. The open junction design includes a solid gel (viscolene) interface between the sample and the internal Ag/AgCl reference. This design not only prevents silver from entering the sample, but also prevents clogging, providing fast response and stable readings.
Quick DIN CONNECTOR
– Attaching and removing the probe becomes simple and easy.
– Rubber layer protects the cable and seals against water without twisting to avoid breaking the pins like the old style.
– Compatible with HI99163 and HI98163 meters.
SPECIFICATIONS
Body material |
PVDF |
Reference |
single, Ag/AgCl |
Joint / Flow Rate |
open |
Electrolysis |
Viscolene / non-stinging |
The scale |
pH: 0 to 12 |
Maximum pressure |
0.1 bar |
Electrode tip |
Cone (6x10mm) |
Diameter |
6mm |
Body length/total |
36mm / 164mm |
Operating temperature |
0 to 50°C – HT |
Temperature sensor |
Have |
Matching Pin |
Are not |
Amplification |
Have |
Digital |
Are not |
Cable |
7 holes, 1m long |
Connector |
Fast DIN port |
Application |
Measure pH in soft meats, semi-solid products or liquids |
Guarantee |
06 months (for products with intact tags and warranty card) |
Supply includes |
– FC2323 electrode with 1m long plastic cable. – Quality certification. – Warranty. – Paper container. |