Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

Soft Soil pH/Temperature Electrode HI12923

Producer: HANNA Instruments

SKU: HANNA-HI12923 Category: Hanna experimental measuring equipment

pH/Temperature Electrode Specialized in Soft Soil

– Glass body

– TApply electrolytic solution

– Conical pointed electrode tip

– Triple junction

– Quick DIN connector

– Integrated temperature sensor

– Replacement electrodes for HI99121, HI98168

– Ideal pH measurement in soft soil, Semi-solid and liquid samples

ELECTRODE BODY MADE OF GLASS

Ideal for laboratory use. Glass is resistant to many harsh chemicals and can be easily cleaned. The glass body also allows rapid heat transfer to the internal reference electrolysis. The mV generated by the reference cells is temperature dependent. The equilibrium state stabilizes faster than the reference potential.

REFILLING ELECTROLYTE SOLUTION HI7071

The electrode can be refilled with 3.5M KCl+AgCl electrolyte solution (HI7071). If using a refillable pH electrode, the refill cap should be removed prior to calibration and measurement. Removing the cap creates a positive head pressure in the reference cell allowing a higher flow rate of electrolyte across the external junction. A higher flow rate will result in a faster and more stable reading.

CINE-SHAPED ELECTRODE HEAD

The conical tip design allows for penetration into solids, semi-solids, and emulsions. The HI12923 is ideal for direct measurement of pH in soil and slurry.

THREE CERAMIC JOINTS

Allows for a higher flow rate of electrolyte from the reference cell into the sample. A typical pH electrode will have a single ceramic junction with a flow rate of 15 to 20 µL/hour. The HI12923 has three ceramic junctions in contact with the sample providing a flow rate of 40 to 50 µL/hour. The increased flow rate provides greater continuity between the reference and indicating electrodes.

Quick DIN ELECTRODE MOUNTING PORT

– “Quick DIN” connector makes attaching and removing the probe simple and easy.

– Rubber layer protects the cable and seals against water without twisting to avoid breaking the pins like the old style.

HOW TO ADD ELECTROLYTE SOLUTION INTO THE BODY OF A pH ELECTRODE

SPECIFICATIONS

Body material	Glass
Reference	Single, Ag/AgCl
Joint	ceramic, ba / 40-50 μL/h
Electrolyte solution	KCl 3.5M + AgCl (HI7071)
The scale	pH: 0 to 12
Maximum pressure	0.1 bar
Electrode tip	Cone (12mm x 12mm)
Operating temperature	-5 to 70°C (23 to 158°F) – LT The higher the sample temperature, the shorter the pH electrode's life
Temperature sensor	Have
Matching Pin	Are not
Amplification	Have
Digital	Are not
Compatible machines	Use with any BNC connected machine
Cable	7 holes; 1 m long
Connector	Quick DIN
Application	Direct pH measurement in soft soils, semi-solids and liquids
Guarantee	06 months. (for products with intact tags and warranty card)
Supply includes	– HI12923 electrode with 1m long plastic cable. – Quality certification. – Warranty. – Paper container.