Product portfolio

SEMIKI measurement solution

Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Desktop scale Technical scales Analytical balance Industrial floor scales Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

Dial gauge 2046S -10mm

Producer: MITUTOYO

Category: Standard measuring tools

The 2046S from Mitutoyo is a standard multi revolution dial indicator suited to general measurement applications. The dual reading scale aids measurement in both directions. The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can easily be installed and removed without tools. Secure adhesion between the bezel and crystal as well as the use of an O-ring prevents water or oil penetration and the spindle is made of high strength quench hardened stainless steel which resists arduous use. Application of a hard coating on the surface of the crystal makes the gauge highly scratch and chemical resistant.
A carbide contact point is used
A special alloy is used for the sector gears to provide improved wear resistance
Plunger type
Continuous dial type
Maximum measuring range up to 10mm
Accuracy of ±13µm
5µm repeatability
0.01mm of resolution
DIN standard

FEATURES

Series 2 dial indicators are Mitutoyo’s most popular, and have the widest application.

Standard 0.01mm graduation dial gauges having an outer frame with an outside diameter of 57mm. All types come with limit pins and an outer frame clamp as standard.
The outer clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
Secured adhesion between the outer frame and crystal as well as the use of an O-ring ensure countermeasures against water and oil permeation via the front face.
The stem spindle is made of high-strength quench-hardened stainless steel which resists strenuous use.
A carbide contact point is used.
The grand gear uses stainless steel that is resistant to wear and deformation.
Application of a hard coating on the surface of the crystal makes the gauge highly scratch- and chemical-resistant

Metric

Grad	Range/ Rev	Dial Reading	Order No	Type	Accuracy	Force
0.01	5mm/1mm	0-100	2044S	w/lug	0.012mm	1.4N or less
0.01	5mm/1mm	0-100	2044S-09	w/lug	0.013mm	1.4N or less
0.01	5mm/1mm	0-100	2044S-60	w/lug	0.012mm	2.5N or less
0.01	5mm/1mm	0-100	2044SB	Flat-back	0.012mm	1.5N or less
0.01	5mm/1mm	0-100	2044SB-09	Flat-back	0.013mm	1.4N or less
0.01	5mm/1mm	0-100	2044SB-60	Flat-back	0.012mm	1.4N or less
0.01	5mm/1mm	0-50-0	2045S	w/lug	0.012mm	1.4N or less
0.01	5mm/1mm	0-50-0	2045SB	Flat-back	0.012mm	2.5N or less
0.01	10mm/1mm	0-100	2046S	w/lug	0.013mm	1.4N or less
0.01	10mm/1mm	0-100	2046S-09	w/lug	0.015mm	1.4N or less
0.01	10mm/1mm	0-100	2046S-15	w/lug	0.013mm	0.8N or less*
0.01	10mm/1mm	0-100	2046S-60	w/lug	0.013mm	2.5N or less
0.01	10mm/1mm	0-100	2046S-69	w/lug	0.015mm	2.5N or less
0.01	10mm/1mm	0-100	2046SB	Flat-back	0.013mm	1.4N or less
0.01	10mm/1mm	0-100	2046SB-09	Flat-back	0.015mm	1.4N or less
0.01	10mm/1mm	0-100	2046SB-15	Flat-back	0.013mm	0.8N or less*
0.01	10mm/1mm	0-100	2046SB-60	Flat-back	0.013mm	2.5N or less
0.01	10mm/1mm	0-100	2046SB-69	Flat-back	0.015mm	2.5N or less
0.01	10mm/1mm	0-100	2046SH	w/lug	0.08mm	1.4N or less
0.01	10mm/1mm	0-100	2046SHB	Flat-back	0.08mm	1.4N or less
0.01	10mm/1mm	0-100	2046SLB	Flat-back	0.013mm	1.4N or less
0.01	10mm/1mm	0-100	2046SY	w/lug	0.013mm	1.4N or less
0.01	10mm/1mm	0-100	2046SYB	Flat-back	0.013mm	1.4N or less
0.01	10mm/1mm	0-50-0	2047S	w/lug	0.013mm	1.4N or less
0.01	10mm/1mm	0-50-0	2047SB	Flat-back	0.013mm	1.4N or less
0.01	20mm/1mm	0-100	2050S	w/lug	0.020mm	2.0N or less
0.01	20mm/1mm	0-100	2050S-19	w/lug	0.020mm	2.0N or less
0.01	20mm/1mm	0-100	2050S-60	w/lug	0.020mm	2.5N or less
0.01	20mm/1mm	0-100	2050SB	Flat-back	0.020mm	2.0N or less
0.01	20mm/1mm	0-100	2050SB-19	Flat-back	0.020mm	2.0N or less
0.01	20mm/1mm	0-100	2050SB-60	Flat-back	0.020mm	2.5N or less
0.01	30mm/1mm	0-100	2052S	w/lug	0.025mm	2.5N or less
0.01	30mm/1mm	0-100	2052S-19	w/lug	0.025mm	2.5N or less
0.01	30mm/1mm	0-100	2052SB	Flat-back	0.025mm	2.5N or less
0.01	30mm/1mm	0-100	2052SB-19	Flat-back	0.025mm	2.5N or less
0.001	1mm/0.2mm	0-100-0	2109S-10	w/lug	0.005mm	1.5N or less
0.001	1mm/0.2mm	0-100-0	2109S-70	w/lug	0.005mm	1.5N or less
0.001	2mm/0.2mm	0-100-0	2109SB-70	Flat-back	0.005mm	1.5N or less
0.001	1mm/0.2mm	0-100-0	2109SH-10	w/lug	0.003mm	1.5N or less
0.001	1mm/0.2mm	0-100-0	2109SLB-10	Flat-back	0.005mm	1.5N or less
0.001	1mm/0.1mm	0-100	2110S-10	w/lug	0.005mm	1.5N or less
0.001	1mm/0.1mm	0-100	2110SB-10	Flat-back	0.005mm	1.5N or less
0.001	1mm/0.1mm	0-100	2110SB-70	Flat-back	0.005mm	2.0N or less
0.001	2mm/0.2mm	0-100-0	2113S-10	w/lug	0.007mm	1.5N or less
0.001	2mm/0.2mm	0-100-0	2113SB-10	Flat-back	0.007mm	1.5N or less
0.001	5mm/0.2mm	0-100-100	2118S-10	w/lug	0.010mm	1.5N or less
0.001	5mm/0.2mm	0-100-100	2118SB-10	Flat-back	0.010mm	1.5N or less
0.001	5mm/0.2mm	0-100-0	2119S-10	w/lug	0.010mm	1.5N or less
0.001	5mm/0.2	0-100-0	2119SB-10	Flat-back	0.010mm	1.5N or less
0.005	5mm/0.5mm	0-50	2124S-10	w/lug

Request a quote

SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED

63 Ho Ba Kien, Ward 15, District 10, Ho Chi Minh City, Vietnam.
Sales@semiki.com
+84 979761016
Tax code 0313928935

TAGS MAKER

A&D

ACO

ADVANTEST

AGR International

AIKOH Engineering

AMETEK Brookfield

AMIS RENESAS

ANMO-DINOLITE

ANRITSU METER

ASKER KOBUNSHI

ASONE

ATAGO

ATTONIC

CARTON Optical

CEDAR SUGISAKI

CHROMA ATE

CUSTOM

DAIICHI KEIKI

DESCO ESD

EGC-KOKUSAI

EISEN

ESPEC

EVIDENT OLYMPUS

FEASA

GATE UNITTA

GRAPHTEC

HAKKO

HANNA Instruments

HIOKI

HIOS

HORIBA

HOZAN TOOL

IMADA

IMV

ISUZU SEISAKUSHO

IWATSU ELECTRIC

JFE Advantech

KANETEC

KANOMAX

KANON NAKAMURA

KASUGA DENKI

KETT Electric

KIKUSUI

KONICA MINOLTA

KORI SEIKI

KYORITSU ELECTRICAL

LINE SEIKI

MAGNA

MALCOM

MATSUSADA PRECISION

MICROCHIP

MITUTOYO

NAGANO KEIKI

NEW COSMOS

NF CORP

NIDEC DRIVE

NIHON DOKI

NIKON Metrology

NIPPON DENSHOKU

NOISEKEN

ONO SOKKI

ORC Manufacturing

OSG

PEACOCK OZAKI

PEAK LOUPES

RIKEN KEIKI

RIKEN KEISOKUKI

RION

RKC INSTRUMENTS

SANKO ELECTRONIC

SATO KEIRYOKI

SATO SK

SEKONIC

SEMIKI

SHIMADZU

SHOWA SOKKI

SIGMA Electronics

SIMCO JAPAN

SMEG instruments

SOKUHANSHA

T&D

TAIYO ELECTRIC

TAKIKAWA

TECLOCK

TESTO

TEXIO-GW

TOHNICHI

TOPCON

TSURUGA Electric

USHIO

X-Rite

YAMATO Scientific

YAMATO-SCALE

YOKOGAWA

Subscribe to our newsletter

The latest news, articles, and resources, sent to your inbox weekly.

Dial gauge 2046S -10mm

Related products

MICROMETER

PEACOCK model H, Model G 0.01mm thickness gauge

TECLOCK GM SERIES OUTSIDE DIAMETER GAUGE

Takikawa LDM Series wire diameter measuring device

Mitutoyo series 543 digital clock

Mitutoyo series 527 depth gauge

Watch hole gauge - 6 - 10mm Mitutoyo

Mitutoyo-Vernier Caliper 150mm

Ask SEMIKI for a quote