Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

Polarographic Dissolved Oxygen Film Filling Solution, 30mL HI7041S

Producer: HANNA Instruments

SKU: HANNA-HI7041S Category: Hanna experimental measuring equipment

– HI7041 electrolyte solution is used to fill dissolved oxygen membranes for polarographic electrodes

– Convenient 30mL dropper bottle.

– Long shelf life

– Each bottle is printed with batch number and expiration date.

– Used for HANNA dissolved oxygen meters (except HI9147)

Purchase at:

HI7041S is an electrolyte solution for polarographic dissolved oxygen probes. Polarographic sensor technology is based on the Ross and Clark polarographic measurement methods. An oxygen probe consists of a platinum electrode and a solid silver electrode. HI7041S is a Potassium Chloride solution that fills the electrode through a PTFE (Polytetrafluoroethylene) membrane. With polarographic technology, an external voltage is applied to the platinum cathode, silver anode, electrolyte solution and gas – permeable membrane proportional to the oxygen concentration in the solution.

HOW TO REPLACE MEMBRANE FOR ELECTRONS

PARAMETER

HI7041S
Product's name	Electrolyte solution used to fill dissolved oxygen film for polarographic electrodes.
Specifications	– 30mL dropper bottle – Colorless solution: The solution does not contain any dyes that could yellow or contaminate the electrode components.
Using	1. Rinse the HI76407A/P measuring membrane cover with a little HI7041 electrolyte solution, gently shaking while rinsing. 2. Place the O-ring in the correct position on the inside of the membrane cover. 3. Fill the HI7041 bottle with new electrolyte solution. 4. Use your finger to gently tap the edge of the membrane cap to ensure there are no trapped air bubbles. Do not tap the membrane directly from the bottom up to avoid damaging the membrane. 5. With the sensor tip facing down, screw the membrane cap onto the probe clockwise. A few drops of electrolyte solution will spill out to be exact.
Methods of preservation	– BStore membrane caps at room temperature, away from direct sunlight. – Do not reuse the old membrane cap after inserting it into the electrode. – Always use new HI7041 electrolyte solution. – When not in use and during polarization, remove the membrane cap and discard the old electrolyte solution inside, then dry the probe and cover the probe with the red and black transport cap originally supplied.. THE ELECTRODE WILL OXIDATE AND BE COMPLETELY DAMAGED IF THE ELECTROLYTE SOLUTION IS LEFT UNUSED FOR TOO LONG TIME. – After use, cover and store at room temperature, away from direct sunlight – DO NOT dilute or add any chemicals to the solution. – Always use fresh solution for each use. – ABSOLUTELY do not pour used solution back into the bottle. – DO NOT use expired products.
Use for	– HI8043 meter – HI76401 electrode – HI9142 meter – HI76407 electrode – HI9146 meter – HI76407/xF electrode – HI2004 meter – HI764080 electrode – HI2040 meter – HI764080 electrode – HI5421 meter – HI76483 electrode – HI98193 meter – HI764073 electrode – HI98194 meter – sensor HI7698194-2
Certificate of Analysis (COA)	Are not
MSDS	Have: HI7041_MSDS
Guarantee	Are not