Force and mechanical measuring equipment
100 ppm Fluoride Standard
Accuracy ±1 @25°C
Used to calibrate ISE electrodes measuring fluoride
Shelf life is at least 1.5 years
Supplied with Certificate of Analysis (COA)
HI4010-02 is a 100 ppm (mg/L) fluoride standard solution.
This solution is used to calibrate the fluoride solid-state ion selective electrode (ISE). Hanna ISE standards are manufactured with high purity chemicals and bottled in Hanna’s state-of-the-art facility. ISEs require calibration to obtain accurate readings when performing measurement techniques such as direct measurement and incremental methods. Up to two-point calibration is recommended for increased accuracy. Volumetric glassware can be used to dilute the standards to fix the desired concentration of the sample being measured. The ISE calibration solutions and sample solutions must always have the same ionic strength by adding TISAB solution.
HI4010-02 |
|
Accuracy @25oC |
100 ± 1 ppm F– *ContentTISAB free bag |
Specifications |
– Plastic bottle mblack. |
Using |
– Pour enough calibration solution into a clean plastic cup so that the electrode, sensor and electrode junction are completely immersed in the calibration solution. – Calibrate the electrode according to the electrode or meter's instruction manual. |
Methods of preservation |
– After use, cover and store at room temperature, away from direct sunlight – Do not dilute or add any chemicals to the solution. – Always use fresh solution for each calibration – ABSOLUTELY do not pour used solution back into the bottle. |
Uses |
Used to calibrate or check the accuracy of any fluoride electrode/meter at 100 ppm. *ContentTISAB free bag |
Certificate of Analysis (COA) |
Have |
MSDS |
Have |
Guarantee |
Are not |