Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / Fluoride Calibration Solution 2ppm With TISAB II, 500 mL HI4010-12
Product portfolio

Fluoride Calibration Solution 2ppm With TISAB II, 500 mL HI4010-12

Producer:
SKU: HANNA-HI4010-12 Category:

HI4010-12 is a high quality 2ppm Fluoride standard solution that is premixed with TISAB II ion adjuster.

Hanna calibration solutions have the production lot number and expiration date clearly stated on the label and have a protective ring on the cap to ensure solution quality. 

2 ppm Fluoride Standard 

Membrane quality assurance

Production lot number and expiration date printed on the label

HI4010-12 is a 2 ppm (mg/L) fluoride standard solution that is premixed with TISAB II. TISAB II is an ISA solution that is used to determine the activity of fluoride ions in solution so that the concentration of fluoride can be measured. TISAB II also reduces interferences from low pH and from ions that complex with fluoride that cannot be measured by the ISE.

This solution is used to calibrate the fluoride solid-state ion selective electrode (ISE). Hanna ISE standards are manufactured with high purity chemicals and bottled in Hanna's state-of-the-art facility. ISEs require calibration to obtain accurate readings when performing measurement techniques such as direct measurement and incremental methods. A two-point calibration is recommended for increased accuracy.

HI4010-12 premixed with TISAB II ion activity modifier ready to use for calibration without the need for any further ISA. It is important that if the calibration solution contains TISAB II then the sample must also additional TISAB II at the same ratio. If calibrating with the HI4010-12, TISAB II must be added to the sample. The ratio is 1:1, where a 50 mL sample will require 50 mL of TISAB.

      – The protective film under the cover is tightly attached

          Ensure the quality of the solution

      – Each bottle is printed with batch number and expiration date

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Floor 12 – Tower A2, Viettel Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City, Vietnam
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • 10th Floor, Halo Building, 19-19/2A Ho Van Hue, Ward 9, Phu Nhuan District, HCMC
Representative office in Hanoi:
  • 9th Floor, 3D Building, No. 3 Duy Tan Street, Dich Vong Hau Ward, Cau Giay District, Hanoi City
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.