HOTLINE: +84 979761016
Force and mechanical measuring equipment
The glass cuvette must be free of defects, dirt, scratches, or fingerprints.
Lock membrane under the lid
The bottle body is clearly printed with the batch number and expiration date.
The glass cuvette is a critical component in the optical system of all colorimetric and turbidity measurements. Light reaching the sample first passes through the glass cuvette. Depending on the sample, the light is absorbed, transmitted, or scattered. Therefore, measurements can be affected if the glass cuvette is defective, dirty, scratched, or has fingerprints.
Always follow proper cleaning, preparation, and handling procedures for cuvettes. After rinsing with HI93703-50 cleaning solution, the cuvette should be rinsed several times with distilled or deionized water and allowed to air dry completely.
Antistatic
An alcohol-based solution will clean glass without leaving any streaks. The anti-static design helps prevent lint from sticking to clean glass.
The protective film under the cover is tightly attached
Ensure the quality of the solution
Each bottle is printed with batch number and expiry date.
Hanna cleaning solution has a shelf life of 5 years from date of manufacture for an unopened bottle.
PARAMETER
|
Pack |
bottle |
|
Size |
230 mL |
|
Quantity |
1 |
|
Certificate of Analysis |
Are not |
IMPORTANT NOTE FOR CUVET
Hanna experimental measuring equipment
Hanna experimental measuring equipment
Hanna experimental measuring equipment
Hanna experimental measuring equipment
Hanna experimental measuring equipment
Hanna experimental measuring equipment
Hanna experimental measuring equipment
Hanna experimental measuring equipment
