Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / Edge Multi-Indicator – pH/Temperature Meter HI2020-02
Product portfolio

Edge Multi-Indicator – pH/Temperature Meter HI2020-02

Producer:
SKU: HANNA-HI2020-02 Category:

– Slim and light tablet design

– pH/ORP/Temperature meter (ORP electrode purchased separately)

– Multi-function: handheld, desktop and wall mounted

– Large screen up to 5.5 inches

– CAL Check self-checks electrodes

– Automatic data recording

– USB 

– The meter comes with a digital electrode and full set of accessories for pH measurement.

– HI2020 can measure EC, TDS or dissolved oxygen (DO) with the purchase of an additional EC or DO probe

   + HI2020-01: uses 115V electricity (USA)

   + HI2020-02: Uses 230V electricity (Vietnam)

   + HI2020-03: Meter only, no accessories such as adapters, electrodes, etc.

WALL MOUNTED DESIGN

Edge® Extremely flexible, can be used in many different applications such as wall-mounted, desktop or handheld.

 

 

SUPER THIN, COMPACT, HAND-HELD DESIGN

With a thickness of only 12mm and weight of only 250g

 

 

STURDY DESKTOP DESIGN

Edge® Equipped with an electrode holder and swivel table to charge and hold the Edge securely at the optimal viewing angle.

 

 

 

 

DIGITAL ELECTRODES 

The edge electrode is considered an advanced product with an integrated microchip that has stored calibration information that can be extracted when power is plugged into the machine. The digital electrode is also equipped with a 3.5 mm jack that can be easily attached to the device

CHECK THE SENSOR

When using Hanna electrodes equipped with a matching pin, edge continuously checks the impedance of the pH electrodes to signal in case the glass electrode breaks. During calibration, the “Sensor Check” will check the condition of the connections. Reference joints are also evaluated and reported on the screen.

 

3.5mm JACK

The 3.5mm round plug makes it easier to remove and install the electrode, avoiding the case of accidentally breaking the pins.

 

 

 

 

 

TWO USB CONNECTOR PORTS

Edge includes a standard USB port for exporting data to a flash drive

A second micro USB port for connecting to a computer for data output and for charging the edge when the charging dock is not available.

 

AUTOMATIC DATA RECORDING

Edge allows storing up to 1000 data records. Settable data are value, GLP data, date and time.

 

 

TWO MODES OF OPERATION

– Basic: Edge reduces some features to make the device operate more simply. 

– Standard: users can change these features.

 

 

 

 

SPECIFICATIONS

pH

The scale

-2,000 to 16,000 pH, -2.00 arrive 16.00 pH

Resolution

0.001 pH, 0.01 pH

Accuracy

±0.002 pH, ±0.01 pH

Calibration

1 to 5 points

Benchmark

1.68, 10.01, 12.45, 4.01, 6.86, 7.01, 9.18, 2 custom buffers

Heat compensation

ATC: -5.0 to 100.0ºC; 23.0 to 212.0°F*

EC (Conductivity) – When attached HI763100 EC/TDS electrode

The scale

0.00 to 29.99 μS/cm, 30.0 to 299.9 μS/cm, 300 to 2999 μS/cm

3.00 to 29.99 mS/cm, 30.0 to 200.0 mS/cm, to 500.0 mS/cm (absolute EC)**

Resolution

0.01 μS/cm, 0.1 μS/cm, 1 μS/cm

0.01 mS/cm, 0.1 mS/cm

Accuracy

±1% measurement result (±0.05 μS or 1 number whichever is greater)

Calibration

1 offset reference point (0.00 μS/cm in air)

1 benchmark at 84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm and 111.8 mS/cm

Heat compensation

ATC (0.0 to 100.0ºC; 32.0 to 212.0 °F), NoTC

TDS (Total Dissolved Solids) – When attached HI763100 EC/TDS electrode

The scale

0.00 to 14.99 ppm (mg/L), 15.0 arrive 149.9 ppm (mg/L), 150 arrive 1499 ppm (mg/L)

1.50 arrive 14.99 g/L, 15.0 arrive 100.0 g/L, to 400.0 g/L (absolute TDS)**

with a conversion factor of 0.80 

Resolution

0.01 ppm, 0.1 ppm, 1 ppm

0.01 g/L, 0.1 g/L

Accuracy

±1% measurement result (±0.03 ppm or 1 number which is greater)

Calibration

through EC calibration

Conversion factor

0.40 to 0.80

 SALINITY (NaCl) – When attaching the EC/TDS electrode HI763100 – BASIC MODE ONLY

The scale

0.0 arrive 400.0 %NaCl 

2.00 arrive 42.00 PSUs

0.0 to 80.0 g/L

Resolution

0.1% NaCl

0.01 PSUs

0.01 g/L

Accuracy

±1% measurement results

Calibration

1 point with HI7037L 100% NaCl standard solution (outside the EC calibration scale)

DISSOLVED OXYGEN (DO) – When attaching the HI764080 DO electrode

The scale

0.00 arrive 45.00 ppm (mg/L)

0.0 to 300.0% saturation

Resolution

0.01 ppm

0.1% saturation

Accuracy

±1 digit and ±1.5% measurement results

Calibration

1 or 2 points 0% (HI7040 solution) and 100% (air)

Heat compensation

ATC: 0 arrive 50 ºC; 32.0 arrive 122.0 °F

Salinity compensation

0 arrive 40 g/L (with 1g/L resolution)

Altitude compensation

-500 arrive 4000 m (with 100m resolution)

TEMPERATURE

The scale

-20.0 to 120.0ºC, -4.0 arrive 248.0°F

Resolution

0.1°C, 0.1°F

Accuracy

±0.5°C, ±1.0°F

OTHER SPECIFICATIONS

pH electrode

   any digital electrode with a 3.5mm jack

GLP

Have

Record data

up to 1000 records (400 in basic mode)

– By hand on request (maximum 200 copies)

– Manually based on stability (maximum 200 copies)

– Record by interval*** (maximum 600 samples; 100 copies)

Connect

1 USB port for charging and connecting to computer, 1 port for storage 

Environment

0 to 50°C (32 to 122°F), RH max 95% non-condensing

The battery

Rechargeable battery with 8 hours of continuous use

Electricity supply

5 VDC adapter (included)

Size

202 x 140 x 12.7mm 

Mass

250 g 

Guarantee 

12 months for machine and 6 months for electrodes 

(for products with intact tags and warranty card)

Supply includes 

Measuring machine HI2020

   + HI2020-01: 115V

   + HI2020-02: 230V

pHHI11310 electrode Glass body with built-in temperature sensor, 3.5mm port

– Solution package pH standard 4.01; pH 7.01 and pH 10.01

– Electrode cleaning solution package

- USB cable

– Electrode holder and charging base

– Wall mount

– 5 VDC adapter

- User manual

- Warranty

– Quality certificate for machine and electrodes

- Containers

Note

* The temperature limit will be reduced to the actual limit of the probe

** does not activate the temperature compensation function

*** only in Standard mode (Data recording)

Accessories purchased separately

– HI764080: Dissolved oxygen electrode

– HI763100: EC/TDS/Salinity Electrode

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Floor 12 – Tower A2, Viettel Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City, Vietnam
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • 10th Floor, Halo Building, 19-19/2A Ho Van Hue, Ward 9, Phu Nhuan District, HCMC
Representative office in Hanoi:
  • 9th Floor, 3D Building, No. 3 Duy Tan Street, Dich Vong Hau Ward, Cau Giay District, Hanoi City
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.