Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

HIOS HP-100 (Bluetooth) electric screwdriver calibration device 0.15-10 Nm

Producer: HIOS

Category: Electric screwdriver leveling machine

HIOS Wireless Digital Torque Gauge
Model: HP-100 (Wireless)
Peak measurement range: 0.15-10N・m/ 15-1000N cm
Accuracy: Within ±0.5% (FS)
Measurement mode: TR1 (waveform), TR2 (continuous waveform), PEAK (peak)
External dimensions 230×110×50(H) (mm)
Weight 1.94kg(g)
Power source (charging time): 1,000mA nickel-metal hydride battery (5 hours)
Rechargeable approx: AC100-240V (50/60Hz)
High precision torque control and management for electric screwdrivers, impact screwdrivers, torque wrenches, etc.
Equipped with wireless communication function, the measured torque waveform will be displayed as a graphic on the large screen, greatly improving visibility and operability.

HIOS Japan

Wireless Digital Torque Meter

Model: HP-100 (Wireless)

High-precision torque check and management for electric screwdrivers, torque screwdrivers, torque wrenches, etc.

HIOS Wireless Digital Torque Meter
Model: HP-100 (Wireless)
Peak measurement range
0.15-10N・m/ 15-1000N cm
Accuracy: Within ±0.5% (FS)
Measurement Mode: TR1 (waveform), TR2 (continuous waveform), PEAK (peak)
External dimensions230×110×50(H) (mm)
Weight 1.94kg(g)
Power source (charging time): 1,000mA nickel-metal hydride battery (5 hours)
Can be recharged approximately : AC100-240V (50/60Hz)

● A wireless model has been released. Measurement data can be transferred wirelessly regardless of the measurement location. Cost reduction achieved by digitalizing and going paperless on-site.
● Wired data output is also standard. Measurement results can be used for quality control records and maintenance.
● An improved display. The larger display makes it easier to see and use.
● Measurement mode now features a waveform mode that visually displays the progression of torque values. Changes from the start of rotation to the peak and abnormal torque value detection are visualized, allowing for more detailed quality checks.
● Measurements in CW (clockwise) and CCW (counterclockwise)
● Measurement units can be switched (Nm ←→ N.cm)
● Inspection report included with all products.
● Can issue various product certificates, such as calibration certificates and traceability system diagrams.

The measured torque data can be transferred to a PC or control device. Various connection methods are available, for example, using wireless technology or connecting to a PC with a USB cable.

TR1 (torque waveform)

The torque change from the start to the end of the measurement is displayed as a waveform, and the maximum torque value is displayed as a fixed value. When the load goes out of the measurement range, the measurement ends.

TR2 (continuous torque waveform)

The load value applied to the detector is displayed. Even if the load is outside the measurement range, the waveform can be measured continuously. Pass/fail judgment cannot be used.

PEAK

Displays the highest measured value (peak value) during measurement. When rotating CCW, a minus sign is displayed.

The main unit settings can also be controlled from an external control device. The measured data is transferred to a PC and can be easily collected and stored via an application. The data can also be exported to a CSV file for use in evaluation and analysis tools.