Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / Force and mechanical measuring equipment / Power screwdriver / industrial electric screwdrivers / HIOS HSⅢ-30 (HS3-30) automatic screw feeder M3.0 (∅4.0-6mm)
Product portfolio

HIOS HSⅢ-30 (HS3-30) automatic screw feeder M3.0 (∅4.0-6mm)

Producer:

HIOS Japan Automatic Screw Feeder
HSⅢ-30 (with HS-SR30)
Nominal screw diameter: M3.0
Head diameter (∅): (∅)4.0-6mm
Head thickness: 0.35-4.5mm
Shaft length: 4.8-20mm
Corresponds to 8 kinds of screw diameters with one main unit by replacing the rail. Fast and stable screw supply. Equipped with safety function that activates overload protection in case of abnormality such as screw clogging.
Number of Screws Thrown: If too many screws are thrown, the direction and movement of the screws will be seriously affected. See diagram on the right for the maximum number of screws thrown in the bucket compartment. The screws must be positioned 2 to 3 mm below the rail groove. Adjusting the height of the brushes: The brushes in the HSF must rotate at a height where they contact the screw head entering the rail groove. If adjustment is required, loosen the brush height adjustment screw.

HIOS Japan

Automatic Screw Feeder 

Model: HSIII-30 (M3.0 / ∅4.0-6mm)

Corresponding to 8 types of screw diameters with one main unit by replacing rails.

Fast and stable supply of screws.

Equipped with a safety function that activates overload protection in the event of an abnormality such as screw clogging.

HIOS Automatic Screw Feeder HSⅢ-30 (with HS-SR30)
Nominal screw diameter: M3.0
Head diameter(∅): (∅)4.0-6mm
Head thickness: 0.35-4.5mm
Shaft length: 4.8-20mm

Pic.: HIOS HSIII-30 (HS3-30) at Semiki's warehouse

Specifications:

Corresponding to 8 types ( M1.0 to M3.0)

HSⅢ-10 (M1.0)/ HSⅢ-12 (M1.2)/ HSⅢ-14 (M1.4)/ HSⅢ-17 (M1.7)

HSⅢ-20 (M2.0)/ HSⅢ-23 (M2.3)/ HSⅢ-26 (M2.6)/ HSⅢ-30 (M3.0)

Quantity of screws thrown in 

If too many screws are thrown in, orientation and transfer of the screws will be seriously affected. See the diagram on the right for the maximum number of throw screws in the scooping chamber.

Screws should be positioned 2 to 3 mm below the rail groove.

Adjusting the height of the brushes 

The brushes in the HSF should rotate at a height where they come in contact with the screw heads going into the rail groove. If adjustment is required, loosen the brush height adjustment screw.

Maintenance and calibration : 

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI Ins

DISTRIBUTED BY:

Semiki instrumentation Co., Ltd

Email: sales@semiki.com

Office tel: +84 28 2253 3522

~DOING OUR BEST FOR YOU~

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Floor 12 – Tower A2, Viettel Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City, Vietnam
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • 10th Floor, Halo Building, 19-19/2A Ho Van Hue, Ward 9, Phu Nhuan District, HCMC
Representative office in Hanoi:
  • 9th Floor, 3D Building, No. 3 Duy Tan Street, Dich Vong Hau Ward, Cau Giay District, Hanoi City
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.