Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

MALCOM RCX-V 2-channel PCB vibration sensor

Producer: MALCOM

Category: PCB function tester

Cảm biến Malcom RCX-V
RCX-V là cảm biến có thể được đặt trên PCB để đo độ rung. Kiểm tra thanh ray/băng tải của lò để đảm bảo PCB không bị rung quá mức.
Phạm vi đo / Độ phân giải / Độ chính xác:
±2,0g (1,0g=9,806 65m/s2)　/　0,001g (1,0g=9,806 65m/s2)　/　　±0,005g (1,0g=9,806 65m/s2)
Độ rung trong quá trình nung chảy lại được đo bằng hai cảm biến.
Có thể dễ dàng hiểu được bằng phép đo gia tốc trọng trường và mỗi X, Y, Z được hiển thị bằng hồ sơ.
● Có thể đo hồ sơ mức độ rung ở trạng thái được nung nóng.
● Gia tốc trọng trường được đo bằng hai cảm biến.
● Kết quả đo được hiển thị trong hồ sơ.
● Phân tích lỗi hàn do rung
● Thay đổi độ rung do cài đặt tốc độ gió
● Kiểm tra trạng thái thiết bị do lão hóa.

Malcom RCX-V Sensor

The RCX-V is a sensor that can be placed on the PCB to measure the vibration.

Verify the oven’s rails/conveyor to ensure the PCB isn’t being exposed to excessive vibration.

Reflow Checker Memory Unit withSubstrateVibrationMonitor
Model: RCX-V

● Vibration level profile measurement is possible in the heated state.
● The gravitational acceleration is measured by two sensors.
● The measurement results are displayed in a profile.
● Analysis of soldering failure due to vibration
● Change in vibration due to wind speed setting
● Inspection of equipment status due to aging.

Vibration during reflow heating is measured by two sensors.
It is easy to understand by gravity acceleration measurement, and each of X, Y, Z is displayed with the profile.

Measuring range / Resolution /Accuracy:
±2.0g (1.0g=9.806 65m/s2)　/　0.001g (1.0g=9.806 65m/s2)　/　　±0.005g (1.0g=9.806 65m/s2)
Max. measuring time : Approx. 3 hours (Ni-MH battery
Sampling time (sec.) : 0.05 , 0.1 , 0.2 , 0.5 , 1.0 , 2.0 , 4.0 , 8.0
Arbitrarily set up possible (synchronized to RCM-S)
Power supply: Supplied from RCM-S main unit, AAA batteries x 3pcs.
Outer dimensions:
Main unit: 221 (D) x 50 (W) x 18 (H) mm (with RCM-S main unit, Sensors are not included)
Sensor: 45 (D) x 35 (W) x 19 (H) mm
Heat resistant case: 360 (D) x 65 (W) x 25 (H) mm
Weight: Approx. 800g