Force and mechanical measuring equipment
– Continuous ORP measurement and control screen.
– Controls a threshold above or below the programmed ORP set point.
– Can be connected to 1 dosing pump.
– Connects to 1 ORP electrode with BNC connector.
– Has exit analog 4-20mA.
– Electrodes purchased separately.
+ BL932700-0: uses 12VDC adapter
+ BL932700-1: use 115/230VAC power source
DOSING RELAY
The dosing relay can be set to dose above or below the user-programmable pH set point.
OVERDOSE PROTECTION
Can be programmed to shut off a valve, pump, or connected device when continuously activated beyond a selected time; Adjust from 5 to 30 minutes.
CONTROL MODE SWITCH
With just one switch, normal “Auto” operation can be converted into “ON/OFF” mode.
ANALOG OUTPUT
4-20 mA analog output for connection to data logger, chart recorder or other device.
PROTECTIVE DOSING
The mini controller is protected against a maximum of 2A load from one pump or connected device.
EASILY CONNECT PERIPHERAL DEVICES
Easy terminal connection to power, communications, dosing control, or sensors.
MATCHING PIN
Protect sensors from ground loops to avoid disturbing measurement results or damaging the system.
BNC
The monitor can connect to any pH electrode with a BNC jack.
SPECIFICATIONS
The scale |
± 1000 mV |
Resolution |
1 mV |
Accuracy (@25°C/77°F) |
±5mV |
Calibration |
By hand, 1 point |
Dosage division |
Maximum 2A (protective fuse), 250 Vac, 30 VDC |
Choose dosage |
Oxidation or reduction, optional on the back contact open = cancel = relay ON if measurement > set point |
Installation point |
Customizable from -1000 to 1000 mV |
Overdose |
Customizable from 5 to nearly 30 minutes |
Input |
10¹² Ohm |
Exit |
4 to 20 mA, accuracy ±0.20 mA, maximum load 500 ¥ |
Electrode |
Compatible with electrodes with BNC port (purchased separately) |
Pump |
Can be connected to 1 pump (purchased separately) |
Electricity supply |
BL932700-0: 12 VDC adapter |
Size |
83 x 53 x 99 mm |
Mass |
BL932700-0: 200g |
Guarantee |
12 months (for products with intact tags and warranty card) |
Supply includes |
– BL932700 screen. – Transparent plastic lid. – Mounting frame. – 12VDC adapter (for BL932700-0). - Warranty. - User manual. - Quality certification. – Paper container. ORP ELECTRODE BNC PORT PURCHASED SEPARATELY |