Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / 1-Pump Continuous pH Measurement and Control Monitor BL981411-1
Product portfolio

1-Pump Continuous pH Measurement and Control Monitor BL981411-1

Producer:
SKU: HANNA-BL981411-1 Category:

– Continuous pH measurement and control screen from 0.0 to 14.0

- Control 1 threshold above or below the programmed pH setpoint

- Control 1 metering pump

– Connect to a pH electrode with a BNC connector

Are not has 4-20mA analog output

– BNC gate electrode purchased separately

   + BL981411-0: 12VDC adapter

   + BL981411-1: 115/230VAC

DOSING RELAY

The dosing relay can be set to dose above or below the user-programmable pH set point.

OVERDOSE PROTECTION

The small controller can be programmed to shut off a valve, pump, or connected device when activated continuously beyond a selected time.

Adjust from 5 to 30 minutes.

CONTROL MODE SWITCH

With just one switch, normal “Auto” operation can be converted into “ON/OFF” mode.

 

 

 

 

  PROTECTIVE DOSING

  The mini controller is protected against a maximum of 2A load from one pump or connected device.

  EASILY CONNECT PERIPHERAL DEVICES

  Quick and easy terminal connection to power, communications, dose control, or sensors.

  MATCHING PIN

  Protect sensors from ground loops to avoid disturbing measurement results or damaging the system.     

   BNC

  The monitor can connect to any pH electrode with a BNC jack.

 

 

 

 

                                       

YouTube video

SPECIFICATIONS

The scale

0.0 to 14.0 pH

Resolution

0.1 pH

Accuracy

(@25°C/77°F)

±0.2 pH

Calibration

Manual, 1 point via CAL (offset) button

Dosage division

Maximum 2A (protective fuse), 250 Vac, 30 VDC

Choose dosage

acid or alkaline

open = acid dosage = relay ON if measurement > set point

closed = alkaline dosage = relay ON if measurement < set point

Installation point

Customizable from 0 to 14 pH

Overdose

Customizable from 5 to nearly 30 minutes

Electrode

Any pH electrode with a BNC connector (purchased separately)

Input

10¹² Ohm

Electricity supply

BL981411-0: 12 VDC adapter;
BL981411-1: 115/230VAC; 50/60Hz

Size

83 x 53 x 99 mm

Mass

BL981411-0: 200 g
BL981411-1: 300 g

Guarantee

12 months

(for products with intact tags and warranty card)

Supply includes

– Screen BL981411.

– Transparent plastic lid.

– Mounting frame.

– 12VDC adapter (for BL981411-0).

- Warranty.

- User manual.

- Quality certification.

– Paper container.

      pH ELECTRODES PURCHASED SEPARATELY

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Floor 12 – Tower A2, Viettel Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City, Vietnam
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • 10th Floor, Halo Building, 19-19/2A Ho Van Hue, Ward 9, Phu Nhuan District, HCMC
Representative office in Hanoi:
  • 9th Floor, 3D Building, No. 3 Duy Tan Street, Dich Vong Hau Ward, Cau Giay District, Hanoi City
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.