Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

Mini Conductivity Monitor (0.00 – 10.00 mS/cm) BL983327-1

Producer: HANNA Instruments

SKU: HANNA-BL983327-1 Category: Hanna experimental measuring equipment

Mini Conductivity Monitor (0.00 - 10.00 mS/cm)

– Continuous conductivity measurement and control screen from 0.00 arrived 10.00 mS/cm.

– Relay control close When measurement point > set point.

– Can be connected to 1 dosing pump.

– Manual calibration at any point from 0.00 arrived 10.00 mS/cm.

– NO 4-20mA analog output

– Connects to 1 HI7632-00 electrode with 2m or 6m cable (buy separately).

+ BL983327-0: 12VDC adapter

+ BL9813327-1: 115/230VAC

Fixed dose distribution relay

The BL983327 has a default dosing setting relay that is a closed contact when above the user programmed set point.

Overdose protection

The small controller can be programmed to shut off a valve, pump, or connected device when activated continuously beyond a selected time; Adjust from 5 to 30 minutes.

Switch control mode

With just one switch, normal “Auto” operation can be converted into “ON/OFF” mode.

Protective dosing

The mini controller is protected against a maximum of 2A load from one pump or connected device.

Connect peripheral devices easily

Quick and easy terminal connection to power, communications, dose control, or sensors.

SPECIFICATIONS

Conductivity scale	0.00 to 10.00 mS/cm
Resolution	0.01 mS/cm
Error (@25°C)	±2% full scale (approx.±0.20mS/cm)
Calibration	Manual, with CAL adjustment knob
Dosage division	Maximum 2A (protective fuse), 250 Vac, 30 VDC
Choose dosage	contact closes when measuring point > set point
Installation point	Customize from 0.00 to 10.00 mS/cm
Overdose	Customizable from 5 to nearly 30 minutes
Heat compensation	Automatic from 5 to 50°C (41 to 122°F) with β =2%/ºC
Electricity supply	BL983327-0: 12 VDC adapter (included) BL983327-1: 115/230VAC; 50/60Hz
Size	83 x 53 x 99 mm
Mass	BL983327-0: 200 g BL983327-1: 300 g
Supply includes	– BL9833 screen27. – Transparent plastic lid. – Mounting frame. – 12VDC adapter (for BL983327-0). - Warranty. - User manual. - Quality certification. – Paper container. CONDUCTIVITY ELECTRODE HI7632-00 PURCHASED SEPARATELY
Guarantee	12 months (for products with intact tags and warranty card)