Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

BL7916-2 pH Control Monitor with Pump

Producer: HANNA Instruments

SKU: HANNA-BL7916-2 Category: Hanna experimental measuring equipment

– Continuous pH measurement and control from 0.00 to 14.00 pH

– Integrated dosing pump from 7.8 to 13.3 liters/hour

– Large LCD screen, easy to observe

– Proportional control helps maintain precise setpoint

– 4 – 20mA output

– Suitable for use in swimming pools, electroplating, wastewater treatment.

EASY TO INSTALL

Designed with mounting holes integrated into the sturdy base, the BL7916 is easy to install. All controls and pump assembly are conveniently located on the front of the unit.

PROPORTIONAL DOSAGE

Proportional control slows the stroke rate as the measured value approaches user-selectable set points, avoiding chemical overdosing. This feature makes pump dosing more accurate, saves chemicals, and eliminates unnecessary and costly adjustments to your process, especially with slow-reacting chemicals.

STURDY CONSTRUCTION

Rugged fiber reinforced IP55 polypropylene housing protects against hazardous spills and splashes. PVDF, FPM/FKM and PTFE materials are used for all parts in contact with liquids to resist chemical corrosion.

SEPARATE OUTPUT

For enhanced troubleshooting and data logging capabilities while monitoring, simply attach a logger to the instrument's 4 to 20 mA output contacts, conveniently located on the front panel, to receive a copy of the results on demand.

SIMPLE PUMPING OPERATION

A positive displacement solenoid with few moving parts makes the BL7916 more reliable than motor driven pumps as there are no rotating parts, gears or cams; significantly reducing the possibility of mechanical failure.

AUXILIARY PUMP SWITCH

Allows the user to mount a mixer or priming pump that is only activated when the metering pump is activated.

PRESSURE/FLOW TABLE

*BAR (PSI)*	*LPH (GPH)*
0.5 (7.4)	13.3 (3.46)
1.0 (14.7)	11.7 (3.04)
2.0 (29.4)	10.1 (2.63)
3.0 (44.1)	9.0 (2.33)
4.0 (58.8)	7.8 (2.03)

SPECIFICATIONS

The scale	0.00 to 14.00 pH
Resolution	0.01 pH
Accuracy	±0.01 pH
EMC deviation	±0.1 pH
Input	10¹² Ohm
Quantitative	Linear, acid or base, user selectable
Calibration	offset: ±1 pH with fine-tuning knob; slope: 85 to 115% with fine-tuning knob
Exit	4-20 mA (isolated)
Dosing Contact	1 isolated contact, 2A, Max. 240V, resistive load, 1,000,000 strokes
Alarm Contact	1 isolated contact, 2A, Max. 240V, resistive load, 1,000,000 strokes
pH electrode	BNC port compatible (purchase separately)
Electricity supply	BL7916-1: 115V BL7916-2: 230V±15%, 50/60Hz (40W)
Environment	0 to 50°C (32 to 122°F); RH max 95% does not condense
Size	W x D x H: 221 x 142 x 181 mm
Mass	5 kg
Guarantee	12 months (For products with intact tags and warranty card)
Supply includes	– BL7916 screen. – Exhaust and suction valves. – Polyethylene pump tube. – Electric cable. – User manual. – Warranty. *BNC pH electrode purchased separately