Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Desktop scale Technical scales Analytical balance Industrial floor scales Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

Clothing button breaking strength tester BC-15 (30KGF)

Producer:

Category: Force measuring system Tag: BC-15

Máy kiểm tra độ căng của các nút đã may SEMIKI-BC-15 lý tưởng để kiểm tra độ bền kéo của nút đã may. Có thể kiểm tra các nút có đường kính lên tới 15mm. Được thiết kế để thiết lập mẫu dễ dàng và nâng cao hiệu quả đo lường.

Universal Mechanial Safety Tester

Button Pull Tester

Model:

SMK-BC15-SVL ( manual test stand )

SMK-BC15-MX2 ( digital test stand)

Button pull tester with standard instrument for textile industry, push pull scale, 20Kgf/30kgf/ 50Kgf… capacity

Button Snap Pull Test Machine is used to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments.

Consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a Stand.

The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp.

By turning the Top Flywheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded.

Button Pull Test Machine used for measuring the responsibility of garment manufacturer to ensure button and firmware can be fixed on the ready-made garments properly, avoiding button drop from garment to brought danger to baby swallow. Used for testing the vertical orientation tension of button and added touch.

Model: SMK-BC15-SVL ( manual test stand ) included:

1. Force gauge:
Digital Force Gauge DST-500N ( 50kgf )
Mechanical Force Gauge FB-30K (30Kgf) or FB-50K (50kgf)

2. Manual Test Stand: SVL-1000N ( 100kgf)

3. Button Pull-Off Strength Attachment BC-15

4. Pantograph Grip Attachment PGC-BC

Model: SMK-BC15-MX2 ( digital test stand ) included:

1. Force gauge:
Digital Force Gauge ZTS-500N ( 50kgf )

With Cable CB-528

2. Digital Test Stand: MX2-500N ( 50kgf)

3. Button Pull-Off Strength Attachment BC-15

4. Pantograph Grip Attachment PGC-BC

Application

• Snap Tester (button pull test machine), to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester for compression and tensile testing of small samples(special attachments are available).

• This snap button pull test machine consists of an upper snap clamp, a lower fabric clamp as well as a force gauge mounted on a stand, and a hand wheel on the bottom of the snap tester. Besides, all these fasteners pull out test equipment which allows fine control with convenient operation, which makes the pull-out test equipment very easy to use.

• The capability of the snap tester can be enhanced with the clamps & accessories for testing other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others. Apart from those mentioned before, you will find more applications for this push-pull test equipment for your testing purpose.

Maintenance and calibration :

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP