Semiki logo
HOTLINE: +84 979761016
0

Cart

No products in the cart.

Continue shopping
Home / Shop / HI98197 EC/TDS/Resistivity/Salinity Meter Special for Ultrapure Water
Product portfolio

HI98197 EC/TDS/Resistivity/Salinity Meter Special for Ultrapure Water

Producer:
SKU: HANNA-HI98197 Category:

– Measuring machine Handheld with the performance and full features of a benchtop meter.

– Resolution up to 0.001 µS/cm

- Measure EC/TDS/Impedance/Salinity/Temperature with only 1 electrode

– Conductivity electrode with 4-ring technology

– Compact, sturdy design.

– The meter is supplied complete with all special accessories for measuring pure water.

– Sturdy case.

  *Specialized for ultra-pure water

HI763123 FOUR RING CONDUCTIVITY PROBE INTEGRATED TEMPERATURE SENSOR

– This 4-ring technology provides more accurate measurement results and a wider measuring range with just one sensor and helps eliminate the polarization effect that often occurs with bipolar electrodes.

– Ultrapure water used in power generation, semiconductor manufacturing and other industries can be difficult to measure due to the possibility of carbon dioxide (CO2) to diffuse into water and form carbonic acid (H2CO3). Carbonic acid will dissociate into hydrogen ions (H+) and bicarbonate ions (HCO3). These ions will increase the conductivity and decrease the resistivity of the water. To accurately measure ultrapure water, a continuous flow measurement is required. The HI98197 uses the HI763123 4-ring probe with a threaded connection that screws into a stainless steel flow sensor. The flow sensor is connected to a water source to determine the conductivity or resistivity. The HI98197 is an ideal meter for monitoring mixed resins or systems producing high purity water of 18.2 MΩ*cm at 25°C.

– HI763123 has a built-in temperature sensor and temperature correction coefficient allowing for accurate measurements over a full range with just one sensor

 

EXTREMELY HIGH ACCURACY

Up to 0.001 µS/cm

LCD DISPLAY WITH BACKLIGHT

Supports users in low light conditions.

AUTOMATIC DATA RECORDING

Records up to 400 records and can transfer data to PC via USB port
 

 

 

 

5 POINT AUTOMATIC CALIBRATION

Automatic buffer recognition and conductivity calibration up to 5 points with built-in points and 1 point for 100% NaCl

USP <645>

The HI98192 can be used to perform all three stages of the USP method required to measure EC of potable water and generate a report when any of the three stages are met (HI98197 should be used when measuring pure water.)

Auto Hold

The AutoHold button holds the first stable value on the display.

 

 

 

 

Quick DIN PORT FOR ELECTRODE CONNECTION

Helps connect quickly, simply and without twisting or tangling between wires.

USB CONNECTION

– HI98192 can transfer data directly to a computer using a USB cable.

– Simply download the free HI92000 software from the HANNA website

 

 

 

 

 

 

The HI98197 meter is supplied complete with all necessary accessories for testing and in a sturdy carrying case:

– Conductivity/TDS/Salinity/Resistivity/Temperature Electrode HI763123

– Conductivity calibration solution

– Accessories for measuring in pure water

– Plastic cup

- The battery 

– Suitcase with sturdy frame to prevent accidental breakage of accessories inside.

 

 

SPECIFICATIONS

CONDUCTIVITY – EC

The scale

0.000 to 9.999 μS/cm;

10.00 to 99.99 μS/cm;

100.0 to 999.9 μS/cm;

1,000 to 9,999 mS/cm;

10.00 to 99.99 mS/cm;

100.0 to 1000.0 mS/cm (actual conductivity; temperature compensated to 400 mS/cm)

Resolution

0.001 μS/cm; 0.01 μS/cm; 0.1 μS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm

Accuracy

±1% measurement result (±0.01 μS/cm or 1 digit, whichever is greater)

Calibration

automatic up to 5 points with 7 available standards (0.00 μS/cm, 84.0 μS/cm, 1.413 mS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm)

TOTAL DISSOLVED SOLIDS – TDS

TDS scale

0.00 to 99.99 ppm (mg/L);

100.0 to 999.9 ppm (mg/L);

1,000 to 9,999 ppt (g/L);

10.00 to 99.99 ppt (g/L);

100.0 to 400.0 ppt (g/L)

TDS resolution

0.01 ppm; 0.1 ppm; 0.001 ppt (g/L); 0.01 ppt (g/L); 0.1 ppt (g/L)

TDS accuracy

±1% measurement result (±0.05 mg/L (ppm) or 1 digit, whichever is greater)

TDS calibration

Based on conductivity calibration

RESISTANCE

The scale

0.1 to 99.9 Ω•cm;

100 to 999 Ω•cm;

1.00 to 9.99 KΩ•cm;

10.0 to 99.9 KΩ•cm;

100 to 999 KΩ•cm;

1.00 to 9.99 MΩ•cm;

10.0 to 100.0 MΩ•cm

Resolution

0.1 Ω•cm; 1 Ω•cm; 0.01 KΩ•cm; 0.1 KΩ•cm; 1 KΩ•cm; 0.01 MΩ•cm; 0.1 MΩ•cm*

Accuracy

±1% measurement result (±10Ω or 1 digit, whichever is larger)

Calibration

Based on conductivity calibration

SALINITY – NaCl

The scale

0.0 to 400.0% NaCl

0.00 to 42.00 PSU – Practical Salinity

0.00 to 80.00 (ppt) – UNESCO 1966 Natural Seawater Scale

Resolution

0.1%; 0.01

Accuracy

±1% measurement results

Calibration

%NaCl scale: 1 point at 100% (HI7037 standard solution purchased separately)

PSU and ppt scale: Based on conductivity calibration

TEMPERATURE

The scale

-20.0 to 120.0°C

-4.0 to 248.0°F

Resolution

0.1°C

0.1°F

Accuracy

±0.2°C ; ±0.4°F (excluding probe error)

Calibration

1 or 2 points

OTHER SPECIFICATIONS

Temperature compensation

Options:

No Temperature Compensation – NoTC

Linear (-20 to 120°C; -4 to 248°F)

Non-linear – ISO/DIN 7888 (-0 to 36°C; 32 to 96.8°F)

Measurement mode

autorange, autoend, lock and default

Reference temperature

15°C, 20°C and 25°C

Temperature coefficient

0.00 to 10.00%/°C

TDS Factor

0.40 to 1.00

Electrode

HI763123 – 4 ring platinum electrode with internal thermistor and 1 m cable (included)

Record on request

400 samples; recording time: 5, 10, 30 seconds, 1, 2, 5, 10, 15, 30, 60, 120, 180 minutes (up to 1000 samples)

Configuration

Up to 10

Connect computer

Via USB port

The battery

4 1.5V batteries 

Automatically turns off

Options: 5, 10, 30, 60 minutes or disabled

Environment

0 to 50°C (32 to 122°F); RH 100% (IP67)

Size

185 x 93 x 35.2 mm 

Mass

400 g               

Guarantee

12 months for the machine and 06 months for the included electrodes

(for products with intact tags and warranty card)

Supply includes

– Measuring machine HI98197

– HI763123 Conductivity/TDS/Resistivity/Salinity/Temperature Electrode with 1m cable

– Stainless steel flow sensor HI605453

– HI7031M 1413 µS/cm calibration solution (230 ml)

– HI7033M 84 µS/cm calibration solution (230 ml)

– 100 ml plastic cup (2)

– Micro USB cable for computer data transfer

– Battery (in the device)

- User manual

– Quality certification for machines and electrodes

- Warranty

– Suitcase for carrying the device

Request a quote
SEMIKI MEASUREMENT EQUIPMENT COMPANY LIMITED
Headquarters:
  • Floor 12 – Tower A2, Viettel Building, 285 Cach Mang Thang Tam, Ward 12, District 10, Ho Chi Minh City, Vietnam
  • Sales@semiki.com
  • +84 979761016
  • Tax code 0313928935
Warranty, maintenance and repair center:
  • 10th Floor, Halo Building, 19-19/2A Ho Van Hue, Ward 9, Phu Nhuan District, HCMC
Representative office in Hanoi:
  • 9th Floor, 3D Building, No. 3 Duy Tan Street, Dich Vong Hau Ward, Cau Giay District, Hanoi City
© 2024 Semiki inc. All rights reserved.

Ask SEMIKI for a quote

Complete the form below to receive a quote from SEMIKI.
You need to enter all information fields below.