Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

HI9811-51 pH/EC/TDS/Temperature Meter

Producer: HANNA Instruments

SKU: HANNA-HI9811-51 Category: Hanna experimental measuring equipment

– Measure pH, conductivity (EC), TDS, temperature with only 1 probe

– Easy to use with simple buttons.

– Manual calibration

– Automatic temperature compensation

– The meter comes with electrodes and necessary standard solutions

– Convenient suitcase for carrying the device.

– Is the new version of model HI9811-5

HANDHELD DESIGN

The meter is designed to be compact, easy to hold and sturdy in the hand

LARGE, CLEAR SCREEN

Large display shows pH, EC, TDS/temperature values along with instructions

EC/TDS CONVERSION FACTOR

Default coefficient 0.5

1-POINT CALIBRATION

– The machine has a calibration function for highly accurate and reliable results

– 1 point calibration at pH7.01 with pH knob

– Common 1-point calibration for EC/TDS at 1.41 mS/cm or 1382 ppm with EC/TDS button

hi1285-5-part-code-side-2100x2100-86a10ed3-0f82-4cc9-947d-d11ae9dc0879-1 MULTI-PARAMETER ELECTRODE pH/EC/TDS/TEMP HI1285-51

– Polypropylene body is highly durable, avoiding breakage or breakage due to accidental collision.

– The probe is filled with gel for maintenance when not in use without the need for periodic refilling. The electrode is suitable for measuring in nutrient solutions such as greenhouses, agriculture, hydroponics.

– The electrode is suitable for measuring in nutrient solutions such as greenhouses, agriculture, and hydroponics.

hi1285-5_tip-2100x2100-835809e0-72ce-4ba8-a49f-c7e181d496cf-2 ALL IN ONE ELECTRODES

Only 1 electrode contains pH sensor bulb, temperature sensor bar and EC/TDS sensor bar. The pH electrode's amplifier blocks moisture and electrical interference from common sources including from motors, ballasts or pumps commonly found in greenhouses.

AUTOMATIC TEMPERATURE COMPENSATION

pH, EC, TDS are all affected by temperature. The electrode with integrated temperature sensor will measure and compensate for the measured results without any further calculations.

hi9811-5120case COMPUTER CARRYING BASIS WITH FULL ACCESSORIES WITHOUT NEED TO BUY ANYTHING MORE

– The meter is supplied with full accessories in a sturdy suitcase, protecting the accessories inside when moving.

Supplied with:

– pH/EC/TDS/Temperature Electrode HI1285-51

– Calibration solution and electrode cleaning after measurement.

SPECIFICATIONS

The scale	pH	0.0 to 14.0 pH
	EC	0 to 6000 µS/cm (1 µS/cm = 0.001 mS/cm)
	TDS	0 to 3000 mg/L (ppm)
	T	0.0 to 60.0°C
Resolution	pH	0.1 pH
	EC	10 µS/cm
	TDS	10 ppm (mg/L)
	T	0.1°C
Accuracy	pH	±0.1 pH
	EC	±2% full scale
	TDS	±2% full scale
	T	±0.5°C
TDS conversion factor		0.5
Calibration		Manual, 1 point for pH and 1 point for EC/TDS – pH at 7.01 – EC at 1413 µS/cm – TDS at 1382 ppm
Heat compensation		Automatic, 0 to 50°C with coefficient β=2%/°C
The battery		1 9V battery/ about 150 hours of continuous use
Environment		0 to 50°C , RH max 100%
Size		145 x 80 x 36 mm
Mass		230 g
Guarantee		12 months for the machine and 6 months for the electrode (for products with intact tags and warranty card)
Supply includes		– Measuring machine HI9811-51 – Electrode pH/EC/TDS/Temperature HI1285-51 1m cable – 1 standard solution packet pH7.01 HI70007 – 1 gVomit TDS standard solution 1382 ppm HI70032 – 1 standard solution packet 1413 µS/cm HI70031 – 2 packets of solution wash electrode – 1 the battery 9V (in machine) – 100mL plastic cup – Quality certificate for machine and electrodes – Warranty – User manual – Suitcase for carrying the device.