Force and mechanical measuring equipment
– Handheld design, resistant to wet hands
– Measure pH, conductivity (EC), TDS, temperature with only 1 probe
– Easy to use with simple buttons.
– Manual calibration
– Automatic temperature compensation
– The meter comes with electrodes and necessary standard solutions
– Convenient suitcase for carrying the device.
– Is the new version of model HI9812-5
HANDHELD DESIGN
The meter is designed to be compact, easy to hold and sturdy in the hand
LARGE, CLEAR SCREEN
Large display shows pH, EC, TDS/temperature values along with instructions
EC/TDS CONVERSION FACTOR
Default coefficient 0.5
1-POINT CALIBRATION
– The machine has a calibration function for highly accurate and reliable results
– 1 point calibration at pH7.01 with pH knob
– Common 1-point calibration for EC/TDS at 1.41 mS/cm or 1382 ppm with EC/TDS button
MULTI-PARAMETER ELECTRODE pH/EC/TDS/TEMP HI1285-51
Polypropylene body has high durability, avoiding breakage or cracking due to accidental impact.
The probe is gel filled for maintenance when not in use without the need for periodic refilling. The electrode is suitable for measuring in nutrient solutions such as greenhouses, agriculture, hydroponics.
The electrode is suitable for measuring in nutrient solutions such as greenhouses, agriculture, and hydroponics.
ALL IN ONE ELECTRODES
Only 1 electrode contains pH sensor bulb, temperature sensor bar and EC/TDS sensor bar. The pH electrode's amplifier blocks moisture and electrical interference from common sources including from motors, ballasts or pumps commonly found in greenhouses.
AUTOMATIC TEMPERATURE COMPENSATION
pH, EC, TDS are all affected by temperature. The electrode with integrated temperature sensor will measure and compensate for the measured results without any further calculations.
COMPUTER CARRYING BASIS WITH FULL ACCESSORIES WITHOUT NEED TO BUY ANYTHING MORE
– The meter is supplied with full accessories in a sturdy suitcase, protecting the accessories inside when moving.
Supplied with:
– pH/EC/TDS/Temperature Electrode HI1285-51
– Calibration solution and electrode cleaning after measurement.
The scale |
pH |
0.0 to 14.0 pH |
EC |
0 to 1999 µS/cm (1 µS/cm = 0.001 mS/cm) |
|
TDS |
0 to 1999 mg/L (ppm) |
|
T |
0.0 to 60.0°C |
|
Resolution |
pH |
0.1 pH |
EC |
10 µS/cm |
|
TDS |
10 ppm (mg/L) |
|
T |
0.1°C |
|
Accuracy |
pH |
±0.1 pH |
EC |
±2% full scale |
|
TDS |
±2% full scale |
|
T |
±0.5°C |
|
TDS conversion factor |
0.5 |
|
Calibration |
Manual, 1 point for pH and 1 point for EC/TDS – pH at 7.01 – EC at 1413 µS/cm – TDS at 1382 ppm |
|
Heat compensation |
Automatic, 0 to 50°C with coefficient β=2%/°C |
|
The battery |
1 9V battery/ about 150 hours of continuous use |
|
Environment |
-5 to 50°C, RH max 100% |
|
Size |
145 x 80 x 36 mm |
|
Mass |
230 g |
|
Guarantee |
12 months for the machine and 6 months for the electrode (for products with intact tags and warranty card) |
|
Supply includes |
– Measuring machine HI9812-51 – Electrode pH/EC/TDS/Temperature HI1285-51 1m cable – Standard solution package pH7.01 HI70007 – GVomit TDS standard solution 1382 ppm HI70032 – Standard solution package 1413 µS/cm HI70031 – Solution package wash HI700661 electrode – 1 the battery 9V (in machine) – Quality certificate for machine and electrodes – Warranty – User manual – Suitcase for carrying the device. |