Force and mechanical measuring equipment
– Handheld design, resistant to wet hands
– Measure pH, conductivity (EC), TDS, temperature with only 1 electrode
– Easy to use with simple buttons.
– Calibration and bautomatic temperature control
– TDS coefficient 0.5 (clean water) or 0.7 (hydroponics).
– HQuick pH/EC/TDS calibration with just 1 solution (Quick CAL).
– The meter comes with electrodes and necessary standard solutions.
– Popular in agriculture, greenhouses and hydroponics.
HANDHELD DESIGN
The meter is designed to be compact, easy to hold and sturdy in the hand
LARGE, CLEAR SCREEN
Large display shows pH, EC, TDS/temperature values along with instructions
EC/TDS CONVERSION FACTOR
Optional factor 0.5 for clean water or 0.7 for hydroponics
AUTOMATIC CALIBRATION
– The machine has a calibration function for highly accurate and reliable results
– Calibration for each type: 2 points at pH7.01 and pH4.01 and 1 point EC/TDS at 1.41 or 5.00 mS/cm
– Quick 1-point calibration for pH/EC/TDS with HI50036 quick calibration solution
ALL IN ONE ELECTRODES
Only 1 electrode contains pH sensor bulb, temperature sensor bar and EC/TDS sensor bar. The pH electrode's amplifier blocks moisture and electrical interference from common sources including from motors, ballasts or pumps commonly found in greenhouses.
AUTOMATIC TEMPERATURE COMPENSATION
pH, EC, TDS are all affected by temperature. The electrode with integrated temperature sensor will measure and compensate for the measured results without any further calculations.
BOX WITH FULL ACCESSORIES WITHOUT NEEDING TO BUY ANYTHING MORE
– The measuring device is supplied with full accessories in a sturdy shaped box, protecting the accessories inside during transportation.
Supplied with:
– HI1285-7 pH/EC/TDS/Temperature Electrode.
– Quick calibration solution package and electrode cleaning solution immediately after measurement.
HOW TO CALIBRATE AND MEASURE
SPECIFICATIONS
The scale |
pH |
-2.00 to 16.00 pH |
EC |
0.00 to 6.00 mS/cm |
|
TDS |
0 to 3000 mg/L (500 CF); 0 to 3999 ppm (700 CF) |
|
Temperature |
0.0 to 60.0°C |
|
Resolution |
pH |
0.01 pH |
EC |
0.01 mS/cm |
|
TDS |
10 ppm (mg/L) |
|
Temperature |
0.1°C |
|
Accuracy |
pH |
±0.02 pH |
EC |
±2% full scale |
|
TDS |
±2% full scale |
|
Temperature |
±0.5°C |
|
TDS conversion factor |
optional 0.5 (500 ppm) or 0.7 (700 ppm) |
|
Calibration |
2 mode options: – Standard for each type: 2 points for pH (pH 4.01, 7.01,10.01) and 1 point for EC/TDS (1.41 mS/cm or 5.00 mS/cm). – Quick calibration: Single point for pH/EC/TDS with Quick CAL HI50036 calibration solution. |
|
Temperature compensation |
Automatic, 0 to 50°C with coefficient β=1.9 %/°C |
|
The battery |
3 1.5V batteries |
|
Environment |
-5 to 50°C, RH max 100% |
|
Size |
154 x 63 x 30 mm |
|
Mass |
196 gr |
|
Guarantee |
12 months for the machine and 6 months for the electrode (for products with intact tags and warranty card) |
|
Supply includes |
– HI9814 meter – HI1285-7 pH/EC/TDS/Temperature Electrode with 1m cable – HI50036 Rapid Standard Solution Pack – HI700661 electrode cleaning solution package. – Battery (in the device). – Quality certificate for machine and electrode. - Warranty. - User manual – Machine box. |