Force and mechanical measuring equipment
– Handheld pH/temperature meter.
– Chuyên đo trên bề mặt da thuộc hoặc giấy
– Điện cực thủy tinh đầu phẳng dễ dàng đo trên bề mặt.
– Thân máy đo chống hơi nước và bụi bẩn khi tay bị ẩm ướt.
– pH value is automatically temperature compensated for high accuracy.
– 1 or 2 point automatic calibration.
– The meter comes with all the necessary accessories for measuring.
– Suitcase with convenient, sturdy inner frame.
pH BỀ MẶT DA THUỘC VÀ GIẤY
Đo pH của giấy, da thuộc, và các bề mặt khác rất quan trọng trong quá trình sản xuất và các giai đoạn sản phẩm cuối cùng. Trong ngành công nghiệp giấy, phép đo pH cho thấy sự ổn định hóa học và tính lâu dài của một tờ giấy. Giấy phải có độ pH trung tính hoặc hơi cơ bản để hỗ trợ trong việc bảo quản tài liệu quan trọng, các ấn phẩm, và tác phẩm nghệ thuật. Một tờ giấy có tính axit hoặc kiềm có thể hấp thụ các hợp chất axit có hại được hình thành một cách tự nhiên theo thời gian. pH của giấy và hộp bìa cứng (carton) cũng rất quan trọng trong ngành công nghiệp thực phẩm. Bao bì thực phẩm thường kết hợp các kháng sinh để ức chế hoạt động của vi sinh vật trong quá trình vận chuyển và bảo quản. Hoạt động của các tác nhân kháng khuẩn có thể nhanh chóng thay đổi với sự biến đổi pH. pH nên được kiểm tra khả năng tương thích với thành phần thực phẩm, hóa học của các chất kháng khuẩn được sử dụng, và các vật liệu đóng gói. Trong quá trình chế tạo da, thuộc da là một trong những bước hóa học phức tạp nhất. Nói chung, thuộc da tạo ra một sản phẩm da dễ thông hơi hơn, linh hoạt hơn, phù hợp để sử dụng trong túi xách, hành lý, hàng may mặc, và nhiều mặt hàng thương mại. Thuộc da được thực hiện bằng một phương pháp thực vật hoặc phương pháp chrome; thuộc da bằng chrome đòi hỏi việc bổ sung muối crom và thành phần cơ bản để nâng cao độ pH. Độ pH của dung dịch được sử dụng trong quá trình làm da và độ pH của sản phẩm da cuối cùng trực tiếp ảnh hưởng đến các đặc điểm như độ cứng, khả năng chịu nhiệt, và độ bền.
ELECTRODE CONDITION
A 1 to 5 bar indicator in the left corner of the screen informs the electrode status when the electrode needs cleaning or recalibration.
LOW BATTERY ALERT
Included battery for 1200 hours of continuous use. When the battery level is below 10%, the warning icon will flash to indicate low battery status.
AUTOMATIC TEMPERATURE COMPENSATION
The measured pH value will be automatically compensated for temperature for accurate measurement results
HANDHELD, COMPACT DESIGN
The body is engineered to fit comfortably in the hand for use in the field Protects against water drops and dirt when your hands are wet
AUTOMATIC pH CALIBRATION
Automatic calibration at 1 or 2 points is quick and convenient
LARGE, CLEAR SCREEN
Large display displays pH and temperature from any angle and dual button operation streamlines the measurement process.
ELECTRODES HAVE NEW STYLE DIN CONNECTORS
– Rubber layer protects cables and seals against water without twisting.
– Đầu nối kiểu DIN mới giúp giảm thiểu vấn đề đầu nối bị gãy khi thao tác tháo hoặc kết nối điện cực.
MÁY HI99171 CUNG CẤP KÈM ĐIỆN CỰC pH/NHIỆT ĐỘ HI14143
THE ELECTRODE HAS AN OPEN CONNECTION DESIGN
Use solid gel electrolyte for contact from skin or scalp and internal Ag/AgCl reference. This interface not only prevents silver from escaping the joint, but also makes it clog-free, allowing for fast measurements and stable readings. This design allows for smaller sample sizes because there are no joints to submerge.
FLAT ELECTRODE HEAD
Cho bề mặt tiếp xúc tối ưu cho các phép đo pH trên bề mặt da (kèm với một giọt nước trên bề mặt da)
BUILT-IN TEMPERATURE SENSOR
CONVENIENT, STURDY MACHINE CARRYING LIFLE
– Specialized electrode cleaning solution for skin
CLEANING THE ELECTROD AFTER EACH MEASUREMENT is very important, if there is dirt on the electrode, it will quickly damage the electrode. Wash by stirring to dissolve dirt into specialized electrode cleaning solution. Do not scrub or scratch the inside glass pH sensor bulb. Then use a paper towel to absorb excess water (do not clean). The cleaning solution will help dissolve dirt more quickly than regular water but still ensures it does not corrode the electrode.
– pH4.01 and pH7.01 machine calibration solution
Sacheted standard solutions ensure freshness for each calibration
pH scale |
-2.00 to 16.00 pH -2.0 arrive 16.0 pH |
pH resolution |
0.01 pH 0.1 pH |
pH accuracy |
±0.02 pH ±0.1 pH |
pH calibration |
automatic, at 1 or 2 points with 2 buffers (standard 4.01, 7.01,10.01 or NIST 4.01, 6.86, 9.18) |
Temperature scale |
-5.0 arrive 105.0°C / 23.0 arrive 221.0°F |
Temperature resolution |
0.1°C / 0.1°F |
Temperature accuracy |
±0.5°C (to 60°C); ±1.0°C (out of scale) ±1.0°F (to 140°F); ±2.0°F (off scale) |
Heat compensation |
automatic from -5.0 to 105.0ºC (23 arrive 221ºF) |
Electrode/Probe |
HI14143 với cảm biến nhiệt độ tích hợp, thân thủy tinh, cổng DIN và cáp 1m Điện cực HI14143 chỉ đo pH từ 0 đến 12 và nhiệt độ từ 0 đến 50°C |
The battery |
3 1.5V AAA batteries / about 1400 hours of continuous use |
Environment |
0 to 50°C (32 to 122°F); RH max 100% |
Size |
154 x 63 x 30 mm |
Mass |
199 gr |
Guarantee |
12 months for the machine and 6 months for the electrode (For products with intact tags and warranty card) |
Supply includes |
– Measuring machine HI99171 – Electrode pH/nhiệt độ HI14143, cáp 1m, cổng DIN – Battery (in the device) – Standard solution package pH 4.01 HI70004P – Standard solution package pH 7.01 HI70007P – 2 packets of solution wash điện cực chuyên dụng sau khi đo HI700680 - User manual – Machine and electrode quality certificate - Warranty |