Force and mechanical measuring equipment
With advanced requirements for miniaturization and high frequency technology of coil products, DWX tester is designed to test other coils and low inductance used in high-end electronic components . Through the use of a pulse source with high-speed switching, a high-efficiency input circuit, and a high-speed A/D sampling circuit, the DWX tester can provide a new solution for inductor tests. short.
DWX-15 | DWX-15PD | ||
---|---|---|---|
Applied voltage/applied steps: *With 1 K Ω load |
1000 V – 15000 V (200 V steps) |
||
Test impedance range | 50μH or higher | ||
Sampling speed/memory | 8bit/10nano-sec.(100MHz) / 8192-Byte | ||
Sampling ranges (WIDTH) | -4、-3、-2、-1、0、1、2、3、4、5 10 ranges (0 is compatible with the DW Series) |
||
Test input circuit (Impedance) | division Resistance (5MΩ) | ||
Screen display, waveform display range |
640 x 460 (VGA), 8.4-inch TFT color liquid crystal, 4-color display 512 x 256 |
||
Judgment method | Comparison of master waveform with test waveform Judgment based on comparison of waveform area, waveform differential area and discharge quantity Winding insulation dielectric breakdown voltage test function | ||
Master waveform memory capacity | Body expansion | 196 types (14 types/14 pages) 700 types with Compact Flash Memory (14 types/50 pages) |
|
Microwave sensor antenna | None | Partial electromagnetic discharge sensing by narrow bandwidth flat batch antenna | |
Detection range | None | It is recommended that a distance of 30 cm be allowed from the test piece to the antenna when the device is installed. | |
Antenna dimensions/Length of cable between antenna and body | None | W = 80 mm, H = 80 MM, D = 10 mm, cable length = 2 m | |
External interface | Parallel I/O (Start, reset, OK, NG, Busy, master switching, etc.) RS-232C (Test control, test data, etc.) Printer board (Hard screen copies, etc.) Ethernet adapter (optional) |
||
Accessories | 15-M test cable: 1, power supply cable (with 3P adapter) parallel I/O connector: 1 User's manual, test result sheets: 1 set |
||
Usage conditions | 0℃ – 40℃, power supply voltage: 100 V 240 V ± 10% (Shipping configuration setting) | ||
External dimensions (Not including carrying handle) ・Weight |
W=364 x 517mm H=517mm |
► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store.
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~