Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

KANETEC KMD SERIES DEMAGNETIC MACHINE

Producer: KANETEC

Category: Demagnetizing table Tag: demagnetizer

KANETEC KMD SERIES DEmagnetizer includes KMD-20C, KMD-30C is a line of demagnetizer equipment on precision mechanical production lines, demagnetizing electronic circuit boards.

Use AC power to generate an alternating magnetic field on the surface, by passing the workpiece through this magnetic field and the device to remove the remaining magnetic surface of the workpiece.

KANETEC JAPAN

TABLE TYPE

DEMAGNETIZER

Model: KMD Series

● Thick workpieces can be demagnetized effectively by moving both the face and the back over the demagnetizer.

● These demagnetizers have good heat radiation and can withstand continuous power-on condition.

● These demagnetizers are very powerful and can demagnetize steel materials that have properties similar to magnetic steel and have large magnetism holding power such as high-speed steel, bearing steel, nickel-chrome steel, spring steel, die steel, etc. that are usually difficult to demagnetize. (KMD-2A, KMD-30C to 50C).

Pic: KANETEC KMD-20C (AC100V) at Semiki's warehouse

[Application]

These demagnetizers produce an alternating magnetic field on the surface by use of an AC power source through

which workpieces are passed to remove the magnetism remaining on their surface.

Video: Demagnetizer Kanetec KMD-20C | review ( Vietnamese )

How to Demagnetize and Precautions for Use:

● Be sure to observe the working rate.

● Move a workpiece over the demagnetizing surface slowly in the direction of AB.

Note that the workpiece must be moved more than 20 cm away from the end of the demagnetizer to be demagnetized effectively. (Table type)

● When the tunnel type demagnetizer is used, pass the workpiece through the tunnel.

● The recommended time for passing the workpiece is about 5 seconds. (Recommended speed: 3 to 5 m/min)

● Some demagnetizers may be heated to very high temperature due to electromagnetic induction action. Exercise caution when handling them.

● If there is any other metal near the demagnetizer, it may also be heated. Keep such metal at least 5 cm away from the demagnetizing surface, and approx. 30 cm or more away when the tunnel type demagnetizer is used. However, if such separation is not possible, use plastics or nonmagnetic materials such as SUS304 for peripheral machinery.