Force and mechanical measuring equipment
SUGASAKI Japan Cedar Torque tester DI-1M-IP series.
Management of Impact tools and oil pulse tools etcHigh precision and lightweight small. The best for everyday check of Management of Impact tools and oil pulse tools etc. Since it is highly precise, the bolting tool of a bolt is controlled on the optimal conditions. Since it is lightweight and small, it can install in a work line. Convenient for the scheduled inspection of a tool
SUGASAKI Japan
Digital Torque Tester
for Air Tools & Impact Wrenches
Model:
DI-1M-IP50 ( 50N/5Kgf )
DI-1M-IP200 (200N/20Kgf)
Cedar DI-1M-IP Series torque testers are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power or manual driver.
These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds.
These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/Nm units are selectable.
USB output, auto zero reset, auto shutoff and low battery indicator complete the set of features.
It is powered by an internal NiCad battery or the included AC adapter.
Features
► Suitable for Impact-based tool management. High accuracy, and portable. It is installed on the work line and is effective for periodic inspection of the tool. The blow counter displays number of blows and value of torque, and LED display which is brighter and easier to read.
• Besides, it can be used for the management of the torque wrench · nut runner.
• Blow counter shows number of blows and value of torque
• Enable to inspect operating torque of manual preset type torque wrench etc. print peak down mode
• Auto power-off function · Autoclear function are installed
• Data acquisition software can be downloaded for free
• Easy to read LED panel displays reference torque value in lbf-ft, kgf-m and Nm (selectable); and number of blows for selected period (0.1 – 9.9 sec)
• Peak, Real Time and Peak Down measuring modes (selectable)
• Ergonomic light weight, torque tester with heavy duty metal construction
Video: Cedar DI-1M-IP Series Digital Torque Tester for Air Tools & Impact Wrenches | intro
Specification
Pic.: CEDAR digital torque tester DI-1M-IP50 ( 0.30~50 Nm) at Semiki's warehouse
Maintenance and calibration :
► We also have calibration certificate attached
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~