Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

MALCOM DS-10S wave soldering furnace temperature analyzer

Producer: MALCOM

Category: Temperature and humidity meter

Malcom DS-10S Immersion Tester for Selective Solder Measurement Systems. Gain critical solder performance information with just one device. Cold Contact Compensation Automatic compensation using platinum thermistor. Ambient temperature 5 minutes or less is stable at 150°C ambient. Battery (1) Two (2) AAA batteries
Usage time More than 10 hours continuously
Sensor mounting plate life More than 5,000 times at 250°C soldering temperature and 5 seconds immersion time.
The self-contained DS-10S moves along the conveyor like a PCB.
Measure the maximum PCB top surface preheat temperature of the record.
Confirm flux and solder levels.
Measure and record the maximum temperature and dwell time of both welds.
Programmable temperature profiles enable 50ms sampling temperature monitoring of preheat and solder temperature sensors, in addition to the usual management items.

MALCOM Japan

Dip Tester For Selective Solder Machine

model : DS-10S

The Dip Tester DS-10S for Selective Soldering Equipment improves process management efficiency by measuring Solder temperature, Soldering time, temperature rising condition, moving speed and solder dimensions a once.

Features & Benefits:

• Solder Temp. Sensor
The sensor part with a small heat capacity accurately measures the solder temperature and atmosphere of the device.

• Dip Time Sensor
Detect electrical continuity and measure solder contact time.

• Pre-heat Sensor
Temperature sensor temperature rise and peak measurement in the sensor board allows relative control of the device state.

• Measurement of Moving Speed
Measure the size of the nozzle by scanning Xand Yon two dip time sensors.

• Profile Measurement
Displays the profile of the solder temperature sensor and preheat sensor.

• DS-10S Software
Perform various management such as OK/NG judgment and data analysis. (Pre-heat temp. Dip time, Solder temp. XY speed, Solder size X, Yand etc.)

Specifications

The Malcom DS-10S Dip Tester for Selective Soldering measurement system. Attain vital soldering performance information with just one device.
The self contained DS-10S rides along the conveyor like a PCB.
Measures the record's maximum PCB topside preheat temperature.
Confirms flux and solder levels.
Measures and records the maximum temperature and dwell times of both solder waves.
Programable temperature profiles make it possible to monitor 50ms sampling temperatures of the preheat & solder temperature sensors, in addition to the conventional management items.

Maintenance and calibration :

► We also have calibration certificate included
► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI CORP