Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

PCA330-2 Chlorine, pH, ORP and Temperature Analyzer and Control

Producer: HANNA Instruments

SKU: HANNA-PCA330-2 Category: Hanna experimental measuring equipment

Chlorine, pH, ORP and Temperature Analyzer and Controller

HANNA PCA330 series analyzes and controls chlorine concentration, pH, ORP and temperature continuously in-line and adjustable chlorine dosing, optional sampling time, alarm system, data connection via GSM network, easy-to-use interface, serial communication via RS485, recording output, 4-20mA dosing output, NEMA 4X housing

From drinking water and wastewater treatment to pool and spa sanitation, controlling chlorine, bromine or iodine levels is important for public health as well as ROI and beneficial for heating systems and industrial applications.

The PCA330 series controls residual chlorine or total chlorine from 0.00 to 5.00 mg/L

In the DPD colorimetric method, the indicator N, N-Diethyl-p-phenylene-diamine and a buffer are mixed with the sample. The residual chlorine oxidizes the DPD indicator reagent at pH 5.5 and 6.0 to form a red compound. The intensity of the color is proportional to the concentration of chlorine in the sample. The purpose of the buffer solution is to maintain the appropriate pH.

To measure total chlorine (free chlorine and combined chlorine), potassium iodide is added. A pH of 5.1 is required for this reaction. Thus, total chlorine measurement requires another buffer solution containing potassium iodide. Once the reactions are complete, the optical signal at 555 nm is compared with the signal obtained after passing the sample before the reagent was added. Finally, the chlorine concentration is calculated and displayed on the screen.

Indicator and buffer reagents are supplied with the meter. With a 5 minute sampling time, reagents only need to be replenished about once a month.

Since chlorine, bromine and iodine are closely related to pH, HANNA has designed the new PCA320 analyzer to monitor pH and temperature. degree and PCA330 for pH, ORP and temperature control .

The PCA320 and PCA330 use the HI1005 pH probe to continuously measure pH in the sample stream over a range of 0 to 14 pH. Sample temperature is measured over a range of 5 to 75°C. pH and temperature are displayed on the front panel, and the pH value is temperature compensated.

The PCA330 uses the HI2008 platinum ORP electrode to continuously measure the ORP value of the sample. A combination pH/temperature sensor and ORP sensor are integrated inside for direct in-stream measurement of the sample.

Measurement and control cycle

PCA has a control time cycle that can be set by the user depending on the size of the control system. Control, pumping and alarm processes can be performed based on this time cycle. The cycle can be set from 3 to 90 minutes.

Chlorine Control

Four user-adjustable chlorine level setpoints: one proportional dosing setpoint, two alarm setpoints and minimum pump level. The proportional dosing factor (1/Δ) is optional with Δ between 0.1 and 2 pH. The chlorine dosing system controls an SPST relay. Each alarm can be enabled or disabled.

pH control

3 pH concentration set points can be set: one control set point and two alarm set points. The pH control modes are user selectable; on/off or proportional dosing. The proportional dosing factor (1/Δ) is optional with Δ between 0.1 and 2 pH. The hysteresis value must be between 0.05 and 2.00 pH. The pH dosing system controls an SPST relay.

The pH, ORP and temperature alarms can be enabled or disabled, and two alarm levels can be set by the user for temperature. The alarm condition controls an SPDT relay. The fault alarm system activates a signal relay when process intervention is required. The fault alarm system controls an SPST relay.

Analog output

Two 4-20 mA or 0-20 mA outputs are available for connection to external devices such as chart recorders. The user can connect two dosing pumps via the 4-20 mA outputs for chlorine and acid/base dosing. The analog outputs are fully programmable and compatible with chlorine concentration, pH or temperature values. The analog output limits are selectable for each parameter.

Record data

Up to 3500 values can be stored (at least 7 days of recording at 3 minute intervals), which can be reviewed or downloaded. The recorded data records include the time, full information about the parameter values and the alarm status at that time.

Alarm and warning system

Through this system, the user can enable or disable low and high alarms for all parameters. The system also provides over-dose protection and alerts when the system is not working properly. The system will stop the process until the error is corrected by the user. The time is displayed on the main control panel and the reminder times are for “old standard”, “expired reagent”, and “expired SIM”. All these alerts are generated based on user settings.

Installation

Easy control with wall mount kit and supplied with chemicals.

(Note: Not for Bromine and Iodine)

Target options:

PCA310	Residual chlorine and total chlorine
PCA320	Residual Chlorine, Total Chlorine, pH and Temperature
PCA330	Residual Chlorine, Total Chlorine, pH, ORP and Temperature

SPECIFICATIONS

Chlorine	The scale	0.00 to 5.00 mg/L (ppm)
	Resolution	0.01 mg/L (ppm)
	Accuracy	± 8% or ±0.05 mg/L whichever is greater
	EMC deviation	±0.05 mg/L (ppm)
	Calibration	1 point
	Sampling time	3 to 90 minutes
	Dosage division	Proportional relay or 4-20mA output
	Delta	Optional from 0.1 to 5 mg/L (ppm)
pH	The scale	0.00 to 14.00 pH
	Resolution	0.01 pH
	Accuracy	± 0.05 pH
	EMC deviation	± 0.2 pH
	Calibration	1; 2 point or in-line calibration
	Sampling time	3 to 120 minutes
	Dosage division	On/off or proportional, relay or 4-20mA output
	Delta	Optional from 0.1 to 2 pH
	Delay	Optional from 0.05 to 2 pH
ORP	The scale	0 to 2000 mV
	Resolution	1 mV
	Accuracy	± 1 mV
	EMC deviation	± 10 mV
Temperature	The scale	5.0 to 75.0^oC
	Resolution	0.1^oC
	Accuracy	± 0.05^oC
	EMC deviation	± 0.5^oC
Exit	4-20mA, 0-20mA
PC connection	RS485
Baud rate	1200, 2400, 4800, 9600 bps
Record data	Up to 3500 points
Alarm relay	SPDT 5A, 230V
Pump relay	SPDT 5A, 230V
Report an error	SPDT 5A, 230V
Pressure rate input	0.07 to 4 bar without external pressure regulator (for pressures exceeding 4 bar an external pressure regulator is required)
Flow rate	100 to 300 mL/min
Sample temperature	5 to 40°C (41 to 104°F)
Input/Output	12mm (1/2″) male NPT fitting
Connect drain	10mm (3/8″) barb
pH/t electrode^o	HI1005 (sold separately)
ORP electrode	HI2008 (sold separately)
Electricity supply	20 VA
Bark	NEMA-4X
Size	318 x 267 x 159 mm (12.5 x 10.5 x 6.25'')
Mass	5 kg (11 lb.) without reagent
Guarantee	12 months
Supply includes	PCA330 is supplied with 2 reagent bottles, 2 reagent caps, 1 DPD powder packet, tubing and instructions. Probe purchased separately, not included
Note	PCA330-1: 115V PCA330-2: 230V