Product portfolio

SEMIKI measurement solution

SoC test system Vision Camera System PCB function tester Chip loading machine Repair measuring equipment

Electronic industry measuring machine

Multi-channel data logger Standard AC/DC programmable power supply High voltage meter Insulation resistance tester Ground resistance meter Leakage current meter ESD measuring device Electrical characteristics analysis equipment Production room equipment

Force and mechanical measuring equipment

Force measuring device clamp set Force sensor Force measuring base Torque wrench Force measuring system Decibel Material thickness gauge Vibration meter Gas meter Mechanical force gauge Electronic force gauge Torque measuring machine Speed machine Device for measuring material hardness Power screwdriver

Measuring equipment for mechanical industry

Standard measuring tools Thread check conditioner Profile measuring machine Coating thickness gauge Quality testing machine Magnetic measuring device Altitude measure

Temperature and humidity measuring device

Temperature and humidity meter Substance concentration measuring device Detachable probe thermometer Infrared thermometer, thermal camera Self-recording thermometer

Optical measuring equipment

Industrial cameras Measurement microscope Digital microscope Stereo microscope Beam intensity meter Colorimeter Endoscopy equipment

Lab equipment

Industrial scales Desktop scale Technical scales Analytical balance Industrial floor scales Hanna experimental measuring equipment Clean room equipment Spectroscopy and X-Ray equipment Simulation cabinets, drying cabinets, furnaces

Mitutoyo 406-251-30 Panme đo ngoài điện tử 25~50mm 0.001mm

Producer: MITUTOYO

SKU: 406-251-30 Category: Standard measuring tools

Panme đo ngoài điện tử Mitutoyo 406-251-30: Công cụ đo lường chính xác cao, chuyên dụng để đo đường kính ngoài các chi tiết trong khoảng 25-50mm. Độ phân giải 0.001mm đảm bảo kết quả đo chi tiết, đáp ứng yêu cầu khắt khe trong sản xuất cơ khí, điện tử và kiểm soát chất lượng.

Thông số kỹ thuật Mitutoyo 406-251-30:

Measuring range: 25~50mm
Division: 0.001mm
Độ chính xác : ± 3μm
Uses SR44 battery (1 piece), battery life 2.4 years, under normal use conditions.

Mitutoyo 406-251-30 Electronic Outside Micrometer 25~50mm 0.001mm

Thông số kỹ thuật Mitutoyo 406-251-30:

Measuring range: 25~50mm
Division: 0.001mm
Độ chính xác : ± 3μm
Uses SR44 battery (1 piece), battery life 2.4 years, under normal use conditions.

Features:

Trục panme không xoay như loại thường mà sẽ chuyển động tịnh tiến.
Hiển thị kết quả đo trên màn hình LCD.
Có thể xuất dữ liệu qua công SPC (phải mua cáp riêng)
Các bề mặt đo của đầu đo di động và cố định hàn carbide, nâng cao khả năng chống mài mòn, tăng tuổi thọ dụng cụ.

Chức năng :

Origin : Set the origin point “0”.
Zero / ABS : Chuyển sang hệ thống đo tuyệt đối ABS.
Hold : Giữ kết quả đo, và xuất dữ liệu đo qua cổng SPC.
Function lock : Khóa chức năng để tránh rủi ro.

Application :

Sử dụng thước Panme để đo kiểm kích thước ngoài (đường kính ngoài, khoảng cách, bề dày..)
Thước được sử dụng chính trong gia công cơ khí chính xác, trong phòng QC, phòng kỹ thuật.

Catalog sản phẩm Mitutoyo 406 Series:

About Mitutoyo Corporation

-&-&-&-

Mitutoyo Corporation is a Japanese multinational corporation specializing in measuring instruments and metrological technology, headquartered in Takatsu-ku, Kawasaki, Kanagawa.

Mitutoyo, founded on October 22, 1934, was founded by Yehan Numata (沼田恵範 Numata Ehan) with one product, micrometers. Mitutoyo's philosophy at the time was to produce high-quality micrometers, but also to produce them in sufficient quantities to make them affordable and available to all. This philosophy was expanded over the next few decades to include a wider product range focusing on mechanical products, dimensional measurements, such as calipers, ring indicators, and other measuring instruments.

As electronic technology became more widely available in the 1970s, Mitutoyo digitized its dimensional measuring instruments to include electronic or digital measuring instruments. During this time the company also began to offer larger, more complex, and more sensitive measuring instruments, including optical comparators, mold measuring instruments, and coordinate measuring machines (CMMs). When statistical process control (SPC) was introduced, Mitutoyo led the world in developing output gages, interfaces, data collectors, and analysis software to take advantage of this new science of measurement.

As computers entered the field of metrology, Mitutoyo once again shifted its focus to incorporate this technology into its products and push measurement accuracy into the sub-micrometer range. Today, Mitutoyo presents more than 6,000 of its products as integrated, computer-based measurement systems that can be interconnected to create closed-loop measurement networks.

Maintenance and calibration :

► We also have calibration certificate attached ( optional )

► Please re-calibrate after use for a certain period through our purchase store.

Local Vietnam : SEMIKI Ins